The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 20, 2007, 10:31 PM   #1
Deer Slayer 270
Member
 
Join Date: January 6, 2007
Posts: 49
243 Win. amount of powder charge

I am about to reload 243 Win for the first time with Hornady 100 grain BTSP. I want to use one of the powders that I already have - H4350, H414, BLC-2 or IMR4064. Any suggestions on which one to use and how many grains. for heavier bullets Hogdon and Lee charts show good performance with H4350 and H414, but want to get some ideas from anybody who has already tried any of these powders as which one they prefer and how many grains do they load it with.

Thanks in advance for your advice.
Deer Slayer 270 is offline  
Old January 21, 2007, 10:07 AM   #2
Zeek5793
Member
 
Join Date: November 23, 2006
Location: Best place on Earth {IDAHO}
Posts: 33
243 load

D S 270,
I've never loaded any H-4350, but I've loaded alot of IMR 4350 & they are only 1 step diff in burn rate so very close, MAKE SURE YOU WORK UP SLOW< But I use, Win, cases, Win,wlr, Primers, Speer 100 gr spbt, 42 gr, Imr 4350,, Shooting out of a weatherbee vangard with a 1 to 10 with a 6x24x42 Nikon. and with a good bench rest and a calm day, you can shoot 5 shot groups, that all will touch at 100yd, I can not do this all the time if I could I'd be shooting for a living but you can get some very good groups with this load,
I take very special care in case peperation, I clean with carb cleaner, deprime clean again,then wash dry and tumble, Blow out with, 180 lb air gun ,I only shoot the brass a max of 4 time and then distroy, I load for my Grandkids and as always, SAFTY FIRST, But this load works for me and them, Good luck, & GOD BLESS
Zeek5793
Zeek5793 is offline  
Old January 21, 2007, 01:32 PM   #3
Trapper L
Senior Member
 
Join Date: November 20, 2006
Location: South Texas
Posts: 804
Deerslayer, here is more data than you probably want from the good folks at Hodgdon. They are now the licensed manufacturers of IMR, Hodgdon, and Winchester powders. You will have to agree to the terms of use first but no other info is required for any search I've done.
http://data.hodgdon.com/main_menu.asp

Probably want to bookmark this one. As new bullets come out the data for them will appear here first before getting into print.
Trapper L is offline  
Old January 22, 2007, 10:52 AM   #4
kingudaroad
Senior Member
 
Join Date: March 11, 2005
Location: austin
Posts: 735
Just Happen To Keep A Hornady Manual At Work

Per Hornady manual sixth edition...H4350 37.4 gr to 40.8 gr 2700 to 2900 fps respectively........IMR4064 29.4gr to 34.2 gr 2500 to 2800 fps respectively.

h414 and BLC-2 not listed with that bullet.
kingudaroad is offline  
Old January 22, 2007, 02:07 PM   #5
blancoman
Member
 
Join Date: December 28, 2006
Posts: 37
go to handloads.com. go to loaddata database on the left side of the screen. then enter caliber bullet weight and voila.
blancoman is offline  
Old January 22, 2007, 03:45 PM   #6
skeeter1
Senior Member
 
Join Date: April 11, 2006
Location: Northeast Ohio
Posts: 3,403
Here's another good site that you might want to check out:

http://www.reloadammo.com/

Lots of good reloading info on this page, including the .243.
skeeter1 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:04 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07187 seconds with 9 queries