The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old October 11, 2006, 06:38 PM   #1
hodaka
Senior Member
 
Join Date: April 23, 2006
Location: South Texas
Posts: 1,858
Lead bullets in a P7?

The book says "no" due to the potential of clogging the gas system. Do any of you have actual experience shooting lead bullets in a P7? It is also supposedly a no-no for a Glock due to the polygonal barrel but I've done it for years with my G17. I do clean the barrel regularly with the Glock. Thanks.
hodaka is offline  
Old October 11, 2006, 06:45 PM   #2
Wildalaska
Junior member
 
Join Date: November 25, 2002
Location: In my own little weird world in Anchorage, Alaska
Posts: 14,174
You have $1,000 plus pistol not designed for lead at all.

Stick with jacketed

WildyouwillbehappierAlaska
Wildalaska is offline  
Old October 11, 2006, 06:55 PM   #3
orionengnr
Senior Member
 
Join Date: July 9, 2004
Posts: 5,031
No experience with lead bullets in a Glock

But in a P7, any bullet with exposed lead facing the powder (and, surprise! this includes some sold as "FMJ") will experience lead vaporisation due to the burning powder.

This molten lead has to go somewhere. Some of it will end up in the gas piston/gas port area, and soon, the slide will stop cycling (ask me how I know).

My P7s were fairly picky about ammo, mostly due to the above.

Note: I only have one now. That is not an indictment of the P7.
orionengnr is online now  
Old October 11, 2006, 07:09 PM   #4
Odd Job
Senior Member
 
Join Date: January 2, 2006
Location: London (ex SA)
Posts: 476
The Vektor CP1 has the same delayed blow-back as the P7, and the Vektor is legendary for needing that little port to be cleaned regularly. This applies to all ammo. However, I will say that in the beginning, when I knew very little about the CP1, I fired 100 all-lead bullets through that gun and I had no ill effects other than stoppages (which I understand now, must have been due to excessive fouling of that port in front of the chamber).
So there you have it. My advice to you, based on my experience with the Vektor, is to not use all lead in your P7, on the grounds of having an excessively-fouled port.
Odd Job is offline  
Old October 12, 2006, 06:31 AM   #5
hodaka
Senior Member
 
Join Date: April 23, 2006
Location: South Texas
Posts: 1,858
Thanks. I happen to agree with all of your comments about the P7. Just wanted to ask the question. I just bought 1000 rounds of Remington 124gr JHP at a good price from Midway anyhow. I just prefer to shoot lead in my pistols since it is more accurate in most of them.
hodaka is offline  
Old October 13, 2006, 09:52 PM   #6
Peter M. Eick
Senior Member
 
Join Date: August 3, 1999
Location: Houston, Texas
Posts: 2,899
I shoot the Remington 124's and 115 JHP's out of my P7's. The post above are exactly right. You will get a buildup of molten lead in the cylinder of the P7 and then it is a pain to clean out. Just don't shoot lead and plateds are well "not a good idea" (in my experience).
__________________
10mm and 357sig, the best things to come along since the 38 super!
Peter M. Eick is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:34 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07616 seconds with 9 queries