The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old September 23, 2006, 01:13 PM   #1
ZeroJunk
Senior Member
 
Join Date: August 14, 2006
Location: Browns Summit NC
Posts: 2,485
Question on Primers

I am reloading hunting loads.I had 1000 Federal 210M match primers,but after several years I have about used them all.I have 1000 CCI 200 and 1000 Remington 9 1/2.Is it worth the trouble for me to get another case of the Federal.I know not to change to magnum,and I know it's something a bench rest shooter is not going to do,but I am not going to shoot at anything far enough away that 1/2 inch difference is going to matter.Would it be a bigger deal than that?
ZeroJunk is offline  
Old September 23, 2006, 01:26 PM   #2
Wildalaska
Junior member
 
Join Date: November 25, 2002
Location: In my own little weird world in Anchorage, Alaska
Posts: 14,174
Switch primers, you have to rework your loads.

WildevenifyouswitchlotsAlaska
Wildalaska is offline  
Old September 23, 2006, 02:56 PM   #3
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 36,074
I'd start with the Remingtons first, and see how they do. Then try some of the CCIs. You might get lucky and find that you don't have to change your load too much.

Some years ago I got lucky and when I switched from CCIs to Winchesters in my .30-06 (dealer was out of CCIs) and doing nothing else to the load my groups tightened up and I had fewer flyers. The opposite could have been just as easily true.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:31 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06260 seconds with 9 queries