Case cleaner........MONSTER

PDshooter · July 1, 2006, 02:35 AM

Well I've been "eye-balling" this case cleaner at work for over 1 year. The boss wanted to go through the wearhouse and clean it out!...He ask me if I still wanted it! "You bet I said".....$50 bucks, and it's your's.....I gave him cash......And "RAN WITH IT"

It's been sitting for over 6yrs......

Kayser · July 1, 2006, 11:12 PM

Ooh, snazzy. What the heck is the listed capacity of that thing? Must be huge.

DWARREN123 · July 3, 2006, 12:20 AM

Is it a Kenmore or G.E.?

Scorch · July 5, 2006, 05:04 PM

You know the worst part about that? Your wife will leave you and your dog won't recognize you if you spend enough time shooting to fill that thing up!

Ruger4570 · July 5, 2006, 05:43 PM

You could polish all the brass from everybody on this forum at one time. That thing is big enough to polish a bus

armedandsafe · July 5, 2006, 07:46 PM

Quote:

That thing is big enough to polish a bus

I'll be right over

Pops

Rottweiler · July 6, 2006, 09:00 AM

I have a couple 5 gallon buckets of 9mm amd 45 brass that I've brass rat collected over a few years.

That beast could probably handle them all at once

**44 AMP** · July 11, 2006, 09:44 PM

If you polish 9mm and .45ACP brass at the same time (in the same tumbler),
YOU'LL BE SORRY!

Rottweiler · July 12, 2006, 08:16 AM

44. You got that right. I made that mistake ONCE. about 5-600 .45s,40s and 9mms got wedged together in cute little "stacks". Took a couple hours with 2 pair of needlenose pliers to pull them apart. That was enough

PDshooter · July 12, 2006, 10:58 PM

I made that mistake ONCE. about 5-600 .45s,40s and 9mms got wedged together in cute little "stacks". Took a couple hours with 2 pair of needlenose pliers to pull them apart. That was enough

No kidding:barf: I picked up a whole 30gal, can 1/2 full of brass..... You name it , it in there! I started to seperate the 9mm, and 40cal,45s 223, 357sig. The hell with it..........

I'm just taking the 45s and .223......The rest is going on E-bay as "Mixed" brass as is...The buyer can mess with it!

July 1, 2006, 02:35 AM	#1
PDshooter Senior Member Join Date: March 30, 2000 Location: Illinois (PRI) Posts: 599	Case cleaner........MONSTER Well I've been "eye-balling" this case cleaner at work for over 1 year. The boss wanted to go through the wearhouse and clean it out!...He ask me if I still wanted it! "You bet I said".....$50 bucks, and it's your's.....I gave him cash......And "RAN WITH IT" It's been sitting for over 6yrs...... __________________ Life member NRA 20yrs guard . MOS 63H 11B 43E Shoot Shovel Shut-up!

July 1, 2006, 11:12 PM	#2
Kayser Senior Member Join Date: May 29, 2002 Location: Illinois :( Posts: 551	Ooh, snazzy. What the heck is the listed capacity of that thing? Must be huge. __________________ ----------------- Box Of Truth Afficionado!

July 5, 2006, 05:04 PM	#4
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 11,113	You know the worst part about that? Your wife will leave you and your dog won't recognize you if you spend enough time shooting to fill that thing up! __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services Taylor Machine

July 6, 2006, 09:00 AM	#7
Rottweiler Senior Member Join Date: January 30, 2001 Location: Texas Hill Country Posts: 332	I have a couple 5 gallon buckets of 9mm amd 45 brass that I've brass rat collected over a few years. That beast could probably handle them all at once __________________ Texas - envied by lesser states since 1845

July 11, 2006, 09:44 PM	#8
44 AMP Staff Join Date: March 11, 2006 Location: Upper US Posts: 9,041	tip If you polish 9mm and .45ACP brass at the same time (in the same tumbler), YOU'LL BE SORRY! __________________ All else being equal (and it almost never is) bigger bullets tend to work better.

July 3, 2006, 12:20 AM	#3
DWARREN123 Senior Member Join Date: January 22, 2006 Location: BETWEEN TN & KY Posts: 1,759	Is it a Kenmore or G.E.?

July 5, 2006, 05:43 PM	#5
Ruger4570 Senior Member Join Date: April 3, 2005 Location: Rochester, New York Posts: 2,136	You could polish all the brass from everybody on this forum at one time. That thing is big enough to polish a bus

July 12, 2006, 08:16 AM	#9
Rottweiler Senior Member Join Date: January 30, 2001 Location: Texas Hill Country Posts: 332	44. You got that right. I made that mistake ONCE. about 5-600 .45s,40s and 9mms got wedged together in cute little "stacks". Took a couple hours with 2 pair of needlenose pliers to pull them apart. That was enough __________________ Texas - envied by lesser states since 1845

July 12, 2006, 10:58 PM	#10
PDshooter Senior Member Join Date: March 30, 2000 Location: Illinois (PRI) Posts: 599	I made that mistake ONCE. about 5-600 .45s,40s and 9mms got wedged together in cute little "stacks". Took a couple hours with 2 pair of needlenose pliers to pull them apart. That was enough No kidding:barf: I picked up a whole 30gal, can 1/2 full of brass..... You name it , it in there! I started to seperate the 9mm, and 40cal,45s 223, 357sig. The hell with it.......... I'm just taking the 45s and .223......The rest is going on E-bay as "Mixed" brass as is...The buyer can mess with it! __________________ Life member NRA 20yrs guard . MOS 63H 11B 43E Shoot Shovel Shut-up!