The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old May 24, 2006, 03:41 PM   #1
eegnayr@yahoo.com
Member
 
Join Date: March 11, 2006
Posts: 30
primers

which primers should i use, CCI 500 or win wsp, reloading for 9mm if that makes a difference.
eegnayr@yahoo.com is offline  
Old May 24, 2006, 03:50 PM   #2
sterno
Senior Member
 
Join Date: January 6, 2005
Location: South Louisiana
Posts: 362
I like CCI. No real reason other than the CCI Blazer is the only .22lr ammo that I've never had a misfire with...ever. If they can make a totally reliable rimfire, my guess is that they can make a totally reliable centerfire primer.
__________________
.38, .39; whatever it took.
Sterno's Myspace - Grayskull Myspace
sterno is offline  
Old May 24, 2006, 03:50 PM   #3
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,412
There are sometimes small differences in the fit, so it would depend on the brass you have? CCI's that I have tend to be a little on the tighter side; wider slightly. Either brand should function fine unless you have a lightened mainspring as part of trigger work you've done or had done, in which case I would use Federal primers because they tend to be a little more sensitive.

Nick
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is online now  
Old May 25, 2006, 06:20 PM   #4
OneInTheChamber
Senior Member
 
Join Date: December 12, 2005
Posts: 789
Also, some primer trays and tubes don't like certain brands of primers. If I remember it was a lee tray and federal primers. I may be wrong though on the federal part; I'm sure it was with a Lee primer tray.
__________________
Insert witty, comical, and/or significant quote here.
OneInTheChamber is offline  
Old May 25, 2006, 10:23 PM   #5
onlybrowning
Senior Member
 
Join Date: December 29, 2005
Location: Saratoga Springs, NY
Posts: 272
Lee does say not to use Federal primers in their Auto Prime, but I have for a few years now without issue. They somtimes need a little shake to fall into the loading area of the tool, but nothing too bad.
onlybrowning is offline  
Old May 26, 2006, 06:44 AM   #6
whitebb
Senior Member
 
Join Date: March 18, 2006
Location: ga
Posts: 313
I use Winchester, always have. I can usually find them were I shop. I recently bought Remington cause thats all they had. Reloading supplies are getting scarce around here. Guess I need to order online. Last time I bought supplies was 3-4 years ago. I buy in bulk.
whitebb is offline  
Old May 26, 2006, 12:18 PM   #7
2400
Senior Member
 
Join Date: September 12, 2004
Location: AZ
Posts: 389
After seeing a couple of your posts I'd advise getting 2 or 3 loading manuals to see what they recomend.
As for which brand I use Winchester, Remington, Federal or CCI magnum or standard primers depending on the cartrige, powder, bullet and which gun I'm loading for.
2400 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06921 seconds with 9 queries