The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old May 8, 2006, 03:47 AM   #1
eegnayr@yahoo.com
Member
 
Join Date: March 11, 2006
Posts: 30
9mm Load Data

Does anyone know of any good loading data for Glock 19, 9mm for 115 or 124 Hornady xtp, or any other data.
eegnayr@yahoo.com is offline  
Old May 8, 2006, 05:28 AM   #2
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,213
specifics

Brother, I do.

E-mail direct with intent and specifics.
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is online now  
Old May 8, 2006, 04:55 PM   #3
kart racer
Senior Member
 
Join Date: April 23, 2005
Posts: 175
5.8-6.0 of unique with 124 gr and 6.1-6.2 of power pistol w/same.
6.0-6.2 0f unique w/115 gr and 6.2-6.6 of power pistol has worked well in my pistols.The 6.0 of unique is higher than some recommend on the 124 gr,but has shown no pressure problems for me,Stephen Camp also recommends that load on his site-I'd definitely use caution working up to it...on the other hand the power pistol ain't no joke in 9mm.
kart racer is offline  
Old May 9, 2006, 08:10 AM   #4
Bob F.
Senior Member
 
Join Date: August 20, 2004
Location: Southeastern WV (left out "north")
Posts: 195
kart racer: good accuracy? I used to shoot alot of Unique in .24ACP especially. Tried Universal in 9mm, not impressed.

Bob
Bob F. is offline  
Old May 9, 2006, 10:13 AM   #5
kart racer
Senior Member
 
Join Date: April 23, 2005
Posts: 175
accuracy

http://www.hipowersandhandguns.com/Handloads.htm
heres some of Mr. Camps.I'll see if I have any of my targets saved at the house.Unique has been most consistant accuracy wise,but the power pistol has been right with.The power pistol does have a lot of flash and bang though.
kart racer is offline  
Old May 9, 2006, 12:14 PM   #6
Bob F.
Senior Member
 
Join Date: August 20, 2004
Location: Southeastern WV (left out "north")
Posts: 195
Yeah, we shoot some night matches w/ just flashlights; some of the guys load Power Pistol. Fun to watch! Not up w/ H110 in .44mag though! LOL
Bob F. is offline  
Old May 9, 2006, 07:55 PM   #7
OneInTheChamber
Senior Member
 
Join Date: December 12, 2005
Posts: 789
115 gr. FMJ, 4.8 gr. of Unique, CCI #400 primers in Glock 17. Very accurate, cycles great, little recoil. Feels like shooting a 9mm with the recoil of a .22
__________________
Insert witty, comical, and/or significant quote here.
OneInTheChamber is offline  
Old May 10, 2006, 10:30 AM   #8
Windjammer
Member
 
Join Date: September 28, 2005
Location: Eastern North Carolina
Posts: 83
115 gr. FMJ over 4.4 gr of Titegroup in a Glock 17. Makes IDPAs FP no problem.

I have found Titegroup to be a very versatile powder. I use it for Bullseye and IDPA in .38 spl, 9mm and .45 ACP
__________________
"I am completely out of ammo... that's never happened to me before." --- Burt Gummer
Windjammer is offline  
Old May 10, 2006, 12:53 PM   #9
silicon wolverine
Senior Member
 
Join Date: April 28, 2006
Location: South dakota
Posts: 674
My particular favorite is 6.3 gr of blue dot with a magnum primer. recoil is a little on the heavy side but its a tackdriving load.

SW
silicon wolverine is offline  
Old May 23, 2006, 01:49 PM   #10
xjz
Member
 
Join Date: October 2, 2005
Location: Peoples Republic of California
Posts: 95
I've had good success with 5.0 gr of unique with winchester small primers and 115 gr copper plated bullet, and recently tried reducing the load to reduce recoil for my wife down to 4.3 gr of unique and she has had a lot of problems with FTF and FTE and just the last time I had a couple FTF with that reduced loading for the first time. I don't have it with me but in my Lee loading manual at home, I do have info on the XTP in both 115 and 124 gr bullets. I will try to get it tonight.
- 115 gr XTP using 5.5 to 6.1 gr of v-N340 or 147 gr XTP using 3.9 to 4.2 gr of bullseye, sorry I have no 124 gr info

Last edited by xjz; May 24, 2006 at 12:35 AM.
xjz is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:51 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08081 seconds with 9 queries