The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old September 18, 2000, 07:44 PM   #1
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 16,779
There always seem to be a coat of rust on my Lee 4-20 pot. While I scrape away to remove it, it always forms. Does anybody else have this problem and what have you done to prevent it?
4V50 Gary is offline  
Old September 18, 2000, 08:02 PM   #2
JimWolford
Member
 
Join Date: June 20, 2000
Posts: 63
All My lead pots rust, it does not seem to affect the bullets that I make, and it is way more trouble than its worth to remove it.

As you found, it returns overnight.

I just wouldn't worry about it. It will take 50 years to rust to the point where it is unuseable<s>

Jim

------------------
Lay up some blackpowder and flints
The rest we can build, if need be
JimWolford is offline  
Old September 19, 2000, 09:48 AM   #3
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 35,892
Common problem, but not a big problem.

Try this. In between casting sessions, put the pot in a cardboard box that is just large enough to hold it, and put about half a dozen to a dozen mothballs in the pot.

As the mothballs sublimate, they drive away moisture laden air.

If that doesn't work, the area where you keep it is just too damp, so you'll need to try something with a better seal, such as a Rubbermail container or a very large (20 or 30mm) ammo can.

------------------
Beware the man with the S&W .357 Mag.
Chances are he knows how to use it.
Mike Irwin is offline  
Old September 19, 2000, 08:15 PM   #4
zot
Senior Member
 
Join Date: April 2, 1999
Location: U.S.A.
Posts: 566
I have the same trouble, but use steel wool
to remove rust and heat the pot a little and
melt Lymans bullet lube all around the inside
zot is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:51 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06159 seconds with 9 queries