The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old September 5, 2000, 10:34 PM   #1
ArmySon
Staff Alumnus
 
Join Date: April 14, 2000
Posts: 2,926
What would you guys recommend as a decent powder to load 168 gr. HPBT MatchKings?
ArmySon is offline  
Old September 6, 2000, 12:48 AM   #2
Johnny Guest
Moderator Emeritus
 
Join Date: August 28, 1999
Location: North Texas
Posts: 4,116
Son--

I've had very good results with 58.0 gr. of IMR 4350, with both the 168 match King and 165 Game King bullets. It yields about 2700 in my Riger 77R with 22 inch bbl, though manuals show somewhat higher.

The Sierra Rifle Reloading Manual, 4th Edition shows COL for both bullets at 3.340 but this is too long for my rifle, and for my son's 1903 Springfield Sporter. 3.295 is about as long as I care to go.

ALSO--While the above powder charge is shown in two different Speer manuals, it is a bit above max in Sierra and Hornady books.

Sierra shows accuracy load with the Match King as 45.9 gr or IMR 4064, for 2600 fps. On previous page, they show the accuracy load for the 165 GameKing at 47.9 gr of 4064, for 2700 fps.

Why? I don't know. That's what it says.

Best of luck to you. Please let me know how it works for you, in what kind of rifle, etc.
Johnny

------------------
---The Second Amendment ensures the rest of the Bill of Rights---
Johnny Guest is offline  
Old September 6, 2000, 12:16 PM   #3
Jack Straw
Senior Member
 
Join Date: July 26, 1999
Location: Georgia
Posts: 362
Son

I load for my dad's Rem 742 using Sierra 165 and 180gr Game Kings and IMR 4064; it works great in his gun.

I asked one of the Sierra technicians about what powder to use since I would be loading for a semi auto and IMR 4064 was his suggestion. I was so pleased with the results that I've never even tried another powder in '06.

BTW, I also use IMR 4064 in my .308 with 165gr Game Kings and in .30-30 w/170gr bullets.

Maybe I'm just partial to IMR 4064.

Jack
Jack Straw is offline  
Old September 6, 2000, 02:10 PM   #4
Art Eatman
Staff Lead
 
Join Date: November 13, 1998
Location: Terlingua, TX, USA
Posts: 22,458
Yeah, once you get toward the 180-grain bullets, the slower powders work better. As said, 4064 and 4350...I imagine H414 would work okay...

It's the old game of "varies from gun to gun" for accuracy, particularly where maximum velocity is less of an issue. You can find beaucoup opinons about that.

I've mostly used 4064; pretty good velocity, and quite accurate.

FWIW, Art
Art Eatman is offline  
Old September 6, 2000, 08:40 PM   #5
ArmySon
Staff Alumnus
 
Join Date: April 14, 2000
Posts: 2,926
It sounds like 4064 is the way to go. I'll pick up a can tomorrow and give it a crack. Thanks again guys!
ArmySon is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:13 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06149 seconds with 9 queries