The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 17, 2000, 11:10 PM   #1
davpet
Member
 
Join Date: March 8, 2000
Posts: 23
Guys,
Help, I don't know if I should crimp my reloads for the Garand in 30-06? I m a newbie and was pretty sure that I didn't need to crimp, but today I was shooting my AR and a demilled LC 84 round misfired-- the bullet was shoved back into the shell. I'm not sure that it was an uncrimped round, or that the gunshow crap magazine was to blame. Help do I crimp any time I reload for a semi auto?

thanks
Dave
davpet is offline  
Old June 18, 2000, 12:21 AM   #2
Ruben Nasser
Senior Member
 
Join Date: March 29, 2000
Location: Asuncion, Paraguay
Posts: 280
If at all possible (if your bullet has a cannelure, or if you have a Lee crimping die), crimp your bullets for a semi auto. If you can't crimp, at least make sure that the bullets are VERY tight in the neck. Loose bullets in the neck are an invitation for trouble in a semi auto. Hope this helps.
Ruben Nasser is offline  
Old June 18, 2000, 07:50 AM   #3
M16
Senior Member
 
Join Date: September 16, 1999
Posts: 489
Ditto to what Ruben posted.
M16 is offline  
Old June 19, 2000, 08:37 PM   #4
Neil H
Junior Member
 
Join Date: June 18, 2000
Location: Salt Lake City, Utah, USA
Posts: 3
Be a little careful not to over crimp using a standard seating/crimping die. If you do, it can cause the sholder of the case to flare enough to make the round difficult or imposible to chamber.
Neil H is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:22 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06173 seconds with 9 queries