The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 8, 2006, 08:47 PM   #1
lizziedog1
Senior Member
 
Join Date: November 23, 2005
Posts: 289
Cast Bullets

I have just picked up an older rifle. I want to shoot cast bullets out of it. I realize that some of you cast your own lead bullets, but I do not have the time for that now.

I know there are several companies that make and sell lead projectiles.

Which company's bullets have any you tried?

Which ones seem to be the best?
lizziedog1 is offline  
Old January 9, 2006, 01:41 AM   #2
Leftoverdj
Senior Member
 
Join Date: October 15, 2004
Posts: 934
Lizzie, commercial cast bullets mostly suck. The good ones cost nearly as much as jacketed. Cast bullets need to be larger than groove diameter so you need to measure the bore diameter by forcing a soft lead slug through and measuring it. Tell us what you have and what you want to do with it, and some of us can help you.
Leftoverdj is offline  
Old January 9, 2006, 12:52 PM   #3
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 3,263
Have a look here. http://www.nationalbullet.com/
T. O'Heir is offline  
Old January 9, 2006, 01:55 PM   #4
Poodleshooter
Senior Member
 
Join Date: August 7, 2000
Location: Floating down the James River in VA
Posts: 2,539
NBC-National Bullet is ok
I've also used Star and Valiant. All of those were for handgun bullets only.
I started casting because too many of the economy brands of bullets (such as those above) were oversized and choked my Glock.
Poodleshooter is offline  
Old January 9, 2006, 06:03 PM   #5
lizziedog1
Senior Member
 
Join Date: November 23, 2005
Posts: 289
What About...

I found a cast bullet company called Beartooth. Many of their bullets list a variety of diameters that a customer can choose from. Any of you tried these bullets?

These bullets will be for an old .25-35 rifle.

I am not looking for benchrest accuracy or long range big game performance. Basically I want bullets that will move forward upon pulling the tigger and not blow the gun up.

I do appreciate all the feedback I am getting.
lizziedog1 is offline  
Old January 9, 2006, 09:01 PM   #6
roy reali
Senior Member
 
Join Date: August 23, 2005
Posts: 3,248
A Good Company

I also occasionally buy cast bullets.

I have found the Oregon Trail Bullets to be pretty decent. While I also agree that homemade cast bullets are better, I have not had any problems with premade bullets.
roy reali is offline  
Old January 9, 2006, 10:02 PM   #7
Leftoverdj
Senior Member
 
Join Date: October 15, 2004
Posts: 934
I don'r buy cast bullets, but Beartooth has a good reputation. For a .25-35, I'd go with .259 diameter and a bullet in the 100-117 grain range. Most .25-35have a very fast twist. You'll want a gas checked bullet unless you are content with very modest velocities, say 1200 fps or under.
Leftoverdj is offline  
Old January 22, 2006, 07:20 AM   #8
skeet47
Member
 
Join Date: November 2, 2005
Posts: 50
cast bullets

I would check with Larry Moss of Precision Cast.He casts bullets for just about everything and has forgotten more about it than most of us will ever know.517-857-2700
skeet47 is offline  
Old January 22, 2006, 08:49 AM   #9
Ruger4570
Senior Member
 
Join Date: April 3, 2005
Location: Rochester, New York
Posts: 2,136
Beartooth,, good stuff
Ruger4570 is offline  
Old January 22, 2006, 10:09 AM   #10
NDTerminator
Member
 
Join Date: January 8, 2006
Posts: 59
I use Laser Cast (by Oregon Trail) bullets exclusively. the company guarantees they won't lead the barrel at jacketed bullet velocities, and I've found this to be true. I've run them up to 2,000FPS out of a 45-70, with no sign of leading. They are very hard (penetrate like a proper SOB for hunting) and extremely accurate. They also use some type of lube that produces very little smoke (many cast bullet lubes produce smoke & residue like you are shooting black powder). They're pretty reasonable, too. I pay $29.99 per 500 for 240 grain Flat Points I load for my 44 mag...
__________________
To my great mortification, my father once told me; "you care nothing but for dogs, shooting, and rat catching, you will be a disgrace to yourself and all your family"

Charles Darwin
NDTerminator is offline  
Old January 22, 2006, 11:18 AM   #11
Doug in Alaska
Junior Member
 
Join Date: November 4, 2005
Location: Wasilla, Alaska
Posts: 12
I shoot nothing but cast bullets in my Marlin 45-70 Guide Gun and Ruger Alaskan .454 Casull. I shoot gas checked bullets in the 45-70 because of the higher velocities and also in the Casull. I don't worry about gas checked bullets when I load the lower velocity rounds for the .45 LC which I also shoot in the Ruger Alaskan. Penetration with a 525 gr. Pile Driver shot from the 45-70 is incredible and this is my prefered load for big bear protection here in Alaska. I buy my cast bullets from BearTooth Bullets down in Idaho. Here is the link to the BearTooth web-site: http://www.beartoothbullets.com/

If you decide to place an order, give Marshal at BearTooth a call first and he will make recommendations for your particular gun. The best time to get him on the phone is in the morning around 9AM Pacific Time. Most importantly, ask him about bullet diameter.
__________________
Someday someone may kill you with your own gun, but they should have to beat you to death with it because it is empty.
Doug in Alaska is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:02 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08027 seconds with 9 queries