The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 19, 2006, 11:16 PM   #1
VUPDblue
Senior Member
 
Join Date: December 18, 2005
Location: Central Indiana
Posts: 1,978
Help loading sabots

Anyone ever tried to load sabots in a rifle cartridge? I have been trying for a while to load .223 bullets in my .308 cases via a sabot. Problem is, I am having a hell of a time finding the proper seating depth of the sabot into the case. Does anyone have any advice on this? The function is just fine the way I have been doing it however, I cannot seem to produce consistent accuracy. Any advice is greatly appreciated.
__________________
Silencers have NEVER been illegal !
VUPDblue is offline  
Old January 20, 2006, 05:37 AM   #2
mtnboomer
Senior Member
 
Join Date: July 9, 2004
Location: Oklahoma by birth. America by the grace of God.
Posts: 635
That probably has little to do with the sabot seating depth. The Remington Accelerator-line of cartridges has had a bad reputation through the years for inaccuracy. It is most likely more of a speed problem. The combination of the sabot and light bullet are causing the combined projectile to move too quickly down the bore causing the sabot to strip on the rifling. Whether you can adjust the speed to cause the sabot to grip the rifling is questionable.
__________________
Quando Omni Flunkus Moritati (If all else fails - play dead!)

Support the Second Amendment. Join the NRA > http://www.nra.org <

Oklahoma State & Big 12 - #1 GO POKES!!!!!
mtnboomer is offline  
Old January 20, 2006, 06:28 AM   #3
Bud Helms
Staff
 
Join Date: December 31, 1999
Location: Middle Georgia
Posts: 12,995
Even if the sabot "rifles" in the bore, there is still the problem of the sabot maintaining a firm grip on the bullet. As long as a normal bullet is used, it has a smooth surface contacting the sabot. So there is the problem of the soft sabot gripping and maintaining a grip on the bore's rifling at modern center fire velocities along with the problem of maintaining a fixed relationship between the sabot and bullet. In other words, there is an inherent problem getting the bullet to stabilize. The faster you send it out the muzzle and the tighter (faster) the bore rifling is, the worse the problem is .... in a sabotted round.

Seems like good way to send a bullet out ala smooth bore (or at best veerrry slow rifling). That could explain the accuracy problems.

The slower I loaded my .308 Accelerators (in a NEF Handi-Rifle), the more accurate they got ... to the point that I had a fairly accurate small critter load. But it wasn't as accurate as a good bolt action .22LR in the $200-230 price range.

FWIW.
__________________
"The irony of the Information Age is that it has given new respectability to uninformed opinion." - John Lawton, speaking to the American Association of Broadcast Journalists in 1995
Bud Helms is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06247 seconds with 9 queries