The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 1, 2000, 04:13 AM   #1
45 Fan
Member
 
Join Date: August 14, 1999
Posts: 27
Hi to the group:
I have a question about the seating die in my Dillon 650. I usually only shoot two different style of bullets; 200grSWC and 230grnRN. I try to keep my C.O.L. at approx. 1.250. Can I simply reverse the seating plug when loading 230grRN and still keep the same C.O.L. or will the different ogive of the bullet cause the overall length to be off? If it will be off, I was considering replacing the Dillon seater with the Redding Competition seater die with micrometer head to be able to readjust my bullet seating depth easily. Any thoughts from the group?...45Fan

------------------
....................
NRA Life Member
IDPA FL AO6743
45 Fan is offline  
Old April 1, 2000, 01:01 PM   #2
EQP
Senior Member
 
Join Date: March 31, 2000
Location: Schaumburg, IL
Posts: 154
45 Fan

I don't have a clue as to the first part of your post but I can comment on the Redding seating die. I use a RL550B and the Redding Competition seating dieand I love it. I load either 185grJHP or 230grRN. It takes me all of 5 seconds to change the seating depth to dead on accurate for either load. It was well worth the extra bucks that it cost! I am considering buying a 9mm for something different to shoot. You can be assured that if I do, I will get the Redding seating die for it as well.

Hope that helps,
Evan
EQP is offline  
Old April 1, 2000, 02:18 PM   #3
char923
Senior Member
 
Join Date: February 18, 2000
Location: Anchorage AK
Posts: 237
45 Fan
I do not known, all you can do is try it, on my 550B press I have two tool heads and two sets of die, one for SWC and one for RN. I do it this way,it save me time with bullet change over all I do is move the powder measure.
char923 is offline  
Old April 1, 2000, 11:59 PM   #4
alan
Senior Member
 
Join Date: June 7, 1999
Posts: 3,745
45fan
I use RCBS dies with a Dillon 550. I would think however, that a fairly significant weight difference and the shape difference would lead to different oal. Also, with a 200 grain swc (H & G 68 or similar), I use an oal of 1.260".

I would suggest that you make up a dummy round with each bullet seated to whatever oal you want. When you change bullets, readjust your seating die as required.
alan is offline  
Old April 2, 2000, 09:39 AM   #5
45acp
Member
 
Join Date: November 10, 1999
Location: annapolis,md u.s.a.
Posts: 45
45 fan,
you will have to adjust the col between the two bullet profiles. i load 230 fmj and 200lswc and definately have to adjust the col between profiles. i use the the xl650 with dillon dies. good luck...
45acp is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06606 seconds with 9 queries