The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 2, 2006, 06:49 PM   #1
kart racer
Senior Member
 
Join Date: April 23, 2005
Posts: 175
45 acp loads w/red dot

Anyone load 230 gr lrn w/red dot?If so what are some of your loads.Thanks

Last edited by kart racer; January 2, 2006 at 07:57 PM.
kart racer is offline  
Old January 2, 2006, 07:37 PM   #2
357shooter
Senior Member
 
Join Date: January 13, 2005
Location: upstate new york
Posts: 111
I have just loaded my first batch of .45 acp and it just so happened to be with red dot.I'm using 4gr. of red dot with a 230 gr lrn.bullet from meister hard cast.I shot a couple of magazines out of my para warthog to test them out.No feeding problems and they seem to be fairly acurate.I already load the 44 mag and the 45 colt but this is my first try at 45 acp.I will be experimenting with different powder in the future but I see no reason red dot wouldn't be a fine powder for the 45 auto.
__________________
shooter....
357shooter is offline  
Old January 2, 2006, 08:40 PM   #3
Poygan
Senior Member
 
Join Date: August 28, 2004
Posts: 125
From the Lyman cast bullet handbook: bullet 452374 @ 225 grains, start load is 4.3 grains red dot for 705 fps; max is 5.3 grains for 835 fps. I usually use 4.8 grains.
Poygan is offline  
Old January 2, 2006, 09:48 PM   #4
HSMITH
Senior Member
 
Join Date: June 21, 2002
Posts: 2,019
I have loaded them from 4-5.0 and had good luck. I REALLY like the smell of Red Dot burning too.

I found Clays to be a little more economical and a little more accurate, so I have been using that for several years.
HSMITH is offline  
Old January 3, 2006, 06:41 PM   #5
kart racer
Senior Member
 
Join Date: April 23, 2005
Posts: 175
Thanks
kart racer is offline  
Old January 3, 2006, 08:19 PM   #6
JDG
Senior Member
 
Join Date: November 28, 2005
Location: West Michigan
Posts: 673
I found this web site, and every load I cross checked was right on.
http://stevespages.com/page8a.htm Good luck and load safe! JDG

I also use clays,best ive found for .45!
JDG is offline  
Old January 4, 2006, 04:31 PM   #7
Michaelm45
Senior Member
 
Join Date: October 28, 2004
Location: NV
Posts: 215
Red Dirt

I've heard many people call Red Dot, Red Dirt.
If you find it dirty, you should give Clays a try.
Michaelm45 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06816 seconds with 9 queries