The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 1, 2006, 04:29 PM   #1
Kayser
Senior Member
 
Join Date: May 29, 2002
Location: Illinois :(
Posts: 550
Check my .50ae load.

Official load data for this cartridge is rather hard to obtain. My huge Hornady tomes contain all kinds of obscure stuff, but not .50 ae. So, I did a little digging on the good ol' internet (how the heck did you guys reload before we had it?) and assembled data from various sources. I found a few curious discrepancies which I figured I'd run by the experts

Note: my primary interest here is using W296 since I have plenty of it around for .44 mag loads. However, I wouldn't be opposed to using H110 since a jug of that would be usable for me for several calibers. Anyway, here's the loads I've found for 325 gr bullets, sorted by W296 and H110 :

edit: I would also prefer to use 300 gr bullets instead of 325's, because they're about 1/3 cheaper from Midway.

W296
------
(Speer)
300gr JHP, 33.5 - 34.5 gr, CCI Magnum primer, 1.58" OAL

(MDSmith, misc internet)
325gr JHP, 29.5 - 32.7 gr, "magnum primers", no OAL listed



H110
------
(Speer)
300gr JHP, 33.5 - 34.5gr, CCI Magnum primer, 1.58" OAL

(MDSmith, misc internet)
325gr JHP, 29.4 - 32.6 gr, "magnum primers", no OAL listed

(Hodgdon)
325gr JHP, 32.5 gr, CCI 350 primer, 1.575" OAL

(handloads.com)
325gr JHP, 29.3 - 32.5 gr, CCI 350 primer, 1.575" OAL

(Lee die set manual)
325gr JHP, 29.0 - 32.5 gr, no primer listed, 1.575" OAL


The only thing that really sticks out to me is that the Speer loads are WAY hot compared to the others. Their starting loads are above max loads for all other data. Is the difference between 300gr and 325gr bullets enough to justify this?

However, there's plenty of agreement on the H110 loads, so I'm figuring to start with

325 JHP, 29.3 - 32.5gr H110, CCI350, 1.575" OAL.

Sound reasonable?
__________________
-----------------
Box Of Truth Afficionado!
Kayser is offline  
Old January 3, 2006, 11:05 PM   #2
Jbar4Ranch
Senior Member
 
Join Date: May 19, 1999
Location: Near Helena, Montana
Posts: 1,539
Speer's 325 grain factory load is generally believed to be 32.5 grains of H110, and their recommended max load for the 300 grainers is 34.5 grains of either H110 or W296.

I've broken down the Speer 325 grainer and it does indeed weigh in at 32.5-32.6 grains and under magnification the powder appears identical to H110. That's not to say that it actually is H110, but it appears to be, and the charge weight is in line with Speer load data.
__________________
Sometimes the squeaky wheel gets replaced...

SASS 47015
Jbar4Ranch is offline  
Old January 3, 2006, 11:30 PM   #3
BigSlick
Senior Member
 
Join Date: January 25, 2005
Location: Texas of course
Posts: 277
I know you have the W296, but if you *might* be interested, take a hard look at H4227.

I use it in 50AE and 500SW and have to say it is proving to be a real favorite.

It doesn't have the muzzle flash of H110, meters like a dream and is a bit more economical than H110 (but not by much).

It is part of the Hodgdon 'Extreme' powders, which claim great stability and consistency under adverse conditions. It is VERY accurate, burns clean and the recoil seems a bit milder than other powders I've tried (2400, W296, H110 and AA#9)

BigSlick
__________________
Nobody likes war, but if you find yourself in one - fight for those you serve with and to make the trip home. Show mercy to those that deserve it and a relentless, ruthless, cunning evil to those who don't.
BigSlick is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:40 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06246 seconds with 9 queries