32 H&R Mag Data

sne7777 · December 31, 2005, 07:08 AM

I need some info for loading a 90 gr. SWC. I'm using the Speer #12 book, it has no data for the SWC.
Which book should I buy?
If anyone has a recipe for this please post it.

Here's what I have in stock to work with.

Brass - Starline
Bullets - Hornady 90gr. SWC
Primers - CCI 500
Powders - Bullseye, Red Dot & SR7625

Thanks

Toney · December 31, 2005, 11:20 AM

32 H&R mag 90grn SWC
Red Dot min 1.8 max 2.8 900fts
Bullseye min 2.2 max 3.1 '''

Out of my hornady book

sne7777 · December 31, 2005, 12:00 PM

Thanks, I'll start on the low end work my up.
I appreciate the information. My book only give info for the 98gr WC.

Thanks again.

Tom Matiska · January 1, 2006, 01:50 AM

Alliant has a selection of 32 H&R 90 SWC loads on their site. Go here:

http://recipes.alliantpowder.com/rg....evolver&step=1

sne7777 · January 2, 2006, 07:40 AM

Thanks for the link Tom. I went to their home page, found other recipes I will use. I've been reloading for a few years, the 32 and also a 35 Rem are new rounds I am starting to load. These are both "hard to find" rounds. Gathering as much info as possible is very helpful.

Thanks again.

December 31, 2005, 07:08 AM	#1
sne7777 Member Join Date: June 11, 2005 Posts: 85	32 H&R Mag Data I need some info for loading a 90 gr. SWC. I'm using the Speer #12 book, it has no data for the SWC. Which book should I buy? If anyone has a recipe for this please post it. Here's what I have in stock to work with. Brass - Starline Bullets - Hornady 90gr. SWC Primers - CCI 500 Powders - Bullseye, Red Dot & SR7625 Thanks

December 31, 2005, 11:20 AM	#2
Toney Senior Member Join Date: August 17, 2005 Location: Stillwater Oklahoma Posts: 558	32 H&R mag 90grn SWC Red Dot min 1.8 max 2.8 900fts Bullseye min 2.2 max 3.1 ''' Out of my hornady book

December 31, 2005, 12:00 PM	#3
sne7777 Member Join Date: June 11, 2005 Posts: 85	Thanks, I'll start on the low end work my up. I appreciate the information. My book only give info for the 98gr WC. Thanks again.

January 1, 2006, 01:50 AM	#4
Tom Matiska Senior Member Join Date: April 13, 2000 Location: Wilkes-Barre, Pa Posts: 927	Alliant has a selection of 32 H&R 90 SWC loads on their site. Go here: http://recipes.alliantpowder.com/rg....evolver&step=1

January 2, 2006, 07:40 AM	#5
sne7777 Member Join Date: June 11, 2005 Posts: 85	Thanks for the link Tom. I went to their home page, found other recipes I will use. I've been reloading for a few years, the 32 and also a 35 Rem are new rounds I am starting to load. These are both "hard to find" rounds. Gathering as much info as possible is very helpful. Thanks again.