The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old February 4, 2000, 10:26 AM   #1
Keeper
Senior Member
 
Join Date: May 14, 1999
Posts: 204
I am looking to start reloading and need advice on the best basic kit to start with. I am going to start reloading .303 and .17 rem. I know that I might have trouble finding dies for the .17 rem.

Thank you.
Keeper is offline  
Old February 4, 2000, 01:38 PM   #2
Mal H
Staff
 
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 14,523
Thank goodness you said "best basic" instead of cheapest. I think the best basic kit that everything you need except the dies is the Rock Chucker Master Reloading Kit. It is occasionally put on sale by Midway and Natchez.
Mal H is offline  
Old February 4, 2000, 01:58 PM   #3
ol blue
Member
 
Join Date: January 21, 2000
Location: USA
Posts: 62
Natchez has the Rock chucker kit on sale now for $214.95. Pretty hard to beat.
ol blue is offline  
Old February 4, 2000, 02:16 PM   #4
Keeper
Senior Member
 
Join Date: May 14, 1999
Posts: 204
Thanks for the advice. That RCBS kit is what I am looking for. I appreciate the help. I am looking forward to reloading my own. I also found .17 and .303 reloading dies in there group A set. Any other advice for a newcomer to reloading is welcome.

Thanks again.
Keeper is offline  
Old February 4, 2000, 11:36 PM   #5
Art Eatman
Staff Lead
 
Join Date: November 13, 1998
Location: Terlingua, TX, USA
Posts: 22,540
My advice? Read various books, and don't get in a hurry.

Search the archives here and browse.

Any time you're at a gunshow and run across a good used reloading book, if the price is right, buy it.

Don't ever get in a hurry.

Then, when you actually start reloading, write down all loads, and date them. If you try test-loads, 3 to 5 loads with a bit different powder as you work up a load, use a magic marker for color coding (just a swipe across the case-head) and write it down!

Double check yourself from time to time as you go. When you use a powder measure, go to the scale every 100-200 rounds and make sure it's still "on weight".

And don't be in a hurry.

, Art
Art Eatman is offline  
Old February 5, 2000, 12:30 AM   #6
swifter...
Senior Member
 
Join Date: March 16, 1999
Location: So. CA Mountains
Posts: 540
The best basic I generally reccommend is the RCBS "Partner" kit, not as heavy-duty as the Rockchucker, but a few bucks less, and made of honest metals, not aluminum pot metal.

------------------
The Bill of Rights, and the Golden Rule are enough for civilized behavior. The rest is window dressing. Shoot carefully, swifter...

swifter... is offline  
Old February 5, 2000, 01:18 PM   #7
TheOtherMikey
Senior Member
 
Join Date: October 16, 1999
Location: Surprise, Arizona, USA
Posts: 171
I'll add my recommendation for the Rock Chucker as an outstanding single stage press. I started with one and still use it for small runs and for heavy magnum loads. I now use a Dillon 550B progressive for production reloading.

You can't go wrong with a Rock Chucker. Regards, Mikey.
TheOtherMikey is offline  
Old February 6, 2000, 06:08 PM   #8
Monkeyleg
Senior Member
 
Join Date: January 25, 2000
Posts: 4,625
I started out years ago with a Rock Chucker and it's still the one I use today. After thousands and thousands of rounds it still performs. And their customer service people are great. When I've broken parts (my fault every time), they send me replacement parts for free.

Dick
Monkeyleg is offline  
Old February 9, 2000, 01:01 PM   #9
sundog
Senior Member
 
Join Date: November 22, 1999
Location: Green Country, OK
Posts: 730
happiness is... an rcbs rockchucker. i also have a thirty plus year young rcbs junior that's still goin' strong. grand kids will probably being using them when i'm long gone. these are good products backed up by a good customer relations department! sundog

------------------
safety first
sundog is offline  
Old February 19, 2000, 12:38 AM   #10
makarov
Senior Member
 
Join Date: January 27, 2000
Location: Washington State
Posts: 621
I have been debating on either the kit with the Partner Press ($99) or the kit with the Rockchucker ($214-250). To me $100 is still a big difference especially if you are just starting out. I think I would vote for the Partner press kit - he is reloading rifle calibers as well. The Rockchucker *can* be converted to progressive with the Piggyback setup. If he were reloading pistol ammo that might be a consideration for future expansion.
makarov is offline  
Old February 21, 2000, 01:52 PM   #11
Nestor Rivera
Senior Member
 
Join Date: October 20, 1998
Location: San Antonio, Texas, USA
Posts: 446
Just a voice in the wilderness, I have been happy with my Lee aniversary kit. Other wise I would probabply go with Liman and the T-Mag Kit.
Nestor Rivera is offline  
Old February 21, 2000, 08:48 PM   #12
killer45auto
Senior Member
 
Join Date: February 7, 2000
Posts: 173
Dont forget the Dillon
killer45auto is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:48 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09127 seconds with 9 queries