The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old February 9, 2000, 01:13 PM   #1
Fusternc
Senior Member
 
Join Date: November 9, 1999
Location: New Hampshire
Posts: 113
Can someone tell me what would be better for target shooting for my Sig P220 and Springfield "Loaded" fullsize? I am looking into getting my first batch of Rainier bullets. I was originally wanting 200gr SWC..but they are out of stock till Mar 29 at Midway USA. If I went with a 200gr Flat point, could I expect the very clean holes as with a SWC bullet? All I have used before are 230gr FMJ bullets from another company, and would like to try something different. What kind of reliabity can I expect in my Sig P220 with a SWC or FP bullet? What about with my Springfield "Loaded" full size? Thanks for the help!

Nathan...
Fusternc is offline  
Old February 9, 2000, 01:30 PM   #2
Gopher a 45
Senior Member
 
Join Date: January 24, 2000
Posts: 329
With the flat point bullet, you will get a hole similar to the 230g ball ammo. It is the outside radius of the bullet's shape that determines the hole shape, sorry. Get the 200gr flatpoints anyway, they're good bullets. You may have trouble with feeding SWCs in your pistol. Pay close attention to OAL. You may want to polish the feed ramp of your gun <slightly>, although it's not mandatory. Be careful so you don't come screaming at me later for making you ruin your barrel. The FPs should feed OK and are generally as reliable as ball, but your gun may vary.

John
Gopher a 45 is offline  
Old February 9, 2000, 04:35 PM   #3
Bill in NM
Member
 
Join Date: January 21, 2000
Posts: 95
I've got a Sig P220 that I load 200gr SWC's (Mite-T brand I think) for. The pistol loves 'em! I'm on my 3rd box of 500, and have yet to have a failure or jam. 7 rounds @ 25 yrds into Approx 3.5, with 4 of the holes touching.
As to your original question, for FMJ, I prefer Flat Points.

Good shootin',
Bill
Bill in NM is offline  
Old February 9, 2000, 05:08 PM   #4
Roman
Junior Member
 
Join Date: January 12, 2000
Posts: 4
If you want to compare prices try alabamaammo.com. They stock the Rainier bullets. They were short on my original request by a couple of hundred but made up for it plus some with another grain and style similar to what I originally ordered. Great price and quick shipping even during the holidays.
Roman is offline  
Old February 10, 2000, 03:39 AM   #5
Paul B.
Senior Member
 
Join Date: March 28, 1999
Location: Tucson, AZ
Posts: 2,598
Fusternc. My Sig P-220 feeds the Lyman #452460 200 gr. semi-wadcutter without a bobble. Can't say what your Springfield would do with them, but I have 4 1911's that also feed them without problems.
If you get a 200 gr. bullet based ont he Hensley&Gibbs #68; those should work well too.
Paul B.
Paul B. is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:03 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06787 seconds with 9 queries