The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 19, 2000, 04:20 PM   #1
Scratch
Member
 
Join Date: October 20, 1999
Location: Bakersfield, Ca,
Posts: 86
I would like t o know how you all store your brass. I have mine in coffee cans, rubbermaid square containers, old cardboard type powder containers and what ever else I can find. It's a real pain especially when you start segragating by manufacturer, and clean, clean and sized, cleaned sized and trimmed; oh, I almost forgot dirty.
Well, you can see my point I have brass every where and need to get it organized.
You comments as always are appreciated.
Thanks
Scratch
Scratch is offline  
Old January 19, 2000, 05:08 PM   #2
Mal H
Staff
 
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 14,481
I bought a couple of six-packs of the plastic tubs from Price Club (Costco, Sam's Club, BJ's, etc.). They will hold several thousand each and nest together for a neat stack.
Mal H is offline  
Old January 19, 2000, 05:30 PM   #3
JoeHatley
Senior Member
 
Join Date: July 1, 1999
Location: Iowa
Posts: 2,135
I load mine up and put them in the plastic ammo boxes from www.midwayusa.com

Then I lock up the boxes in an office style metal file cabinet.

Joe


------------------
Go NRA
JoeHatley is offline  
Old January 19, 2000, 06:19 PM   #4
rblack
Senior Member
 
Join Date: November 18, 1999
Posts: 293
Mal H, Thats a great idea. I have mine in all kind of different shoe boxes. I'm going to Sam's Club. Thanks, Rod Black
rblack is offline  
Old January 19, 2000, 06:57 PM   #5
JHS
Senior Member
 
Join Date: November 30, 1998
Location: Goodwell,Ok.
Posts: 505
Ziploc bags.
JHS is offline  
Old January 19, 2000, 11:54 PM   #6
Joe Portale
Senior Member
 
Join Date: June 8, 1999
Location: Tucson, Arizona Territory
Posts: 715
I store my brass in those 3 gallon plastic paint buckets you get from the hardware store. They are stacked up under my loading bench. I also use a five gallon bucket to drop my used brass until I sort and tumble them.

------------------
Joe Portale
Tucson, Arizona territory

"The unarmed man is a subject, the armed man is a citizen."
Joe Portale is offline  
Old January 20, 2000, 03:53 AM   #7
oberkommando
Senior Member
 
Join Date: September 25, 1999
Posts: 1,155
55 gal drums.

Actully fifty cal ammo can work fine, sometimes use zip locks to.
oberkommando is offline  
Old January 20, 2000, 09:27 AM   #8
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,105
Keep cleaned cases covered (airtight) to resist corrosion.

------------------
"All my ammo is factory ammo"

WESHOOT2 is offline  
Old January 20, 2000, 09:38 AM   #9
Cat
Senior Member
 
Join Date: February 12, 1999
Location: Ohio, USA
Posts: 467
I have been using different size coffee cans for years. I keep my empty brass as well as my loaded ammo and magazines/speed loaders in them. I mark the contents on the lid with a magic marker that wipes off with solvent when I want to re-label them.
The guys at the range used to kid me about them but they are sturdy, relatively water proof, and cheap.

Neil Casper
Cat is offline  
Old January 20, 2000, 12:25 PM   #10
Trigger Jerk
Senior Member
 
Join Date: November 22, 1999
Location: Eastern WA
Posts: 136
If the brass is dirty, I keep it in open bins like come with the Dillon presses until full, then I move it to a larger plastic container, like tupperware. The 99 cent store is a great place to find such containers. they are cheap, and you can have everything consistent in size, thus taking up less room, and being a little more tidy.

If it's clean brass, it's not long before it's loaded. then it either goes into 50 cal ammo cans or 50 count plastic boxes.
Trigger Jerk is offline  
Old January 20, 2000, 07:01 PM   #11
fubsy
Senior Member
 
Join Date: May 20, 1999
Posts: 1,361
Just about everything....ammo cans,20mm are good and have handles, very heavy so use a hand truck....and that plastic container Idea Ive just seen and it works real good...fubsy.
fubsy is offline  
Old January 20, 2000, 07:29 PM   #12
Sport45
Senior Member
 
Join Date: May 25, 1999
Location: Too close to Houston
Posts: 4,042
A 5 quart ice cream bucket holds 1000 .45acp brass. They stack well and I like emptying them.
Sport45 is offline  
Old January 20, 2000, 07:44 PM   #13
alan
Senior Member
 
Join Date: June 7, 1999
Posts: 3,737
Mentioned before, but COFFEE CANS DO WORK. the 3# size will hold between 500 and 550 rounds of 45ACP, and a whole lot more of 9mm or 38 Special. The snap on plastic covers are at least reasonably dust free, and they stack neatly.

30-06 and 308 went into paper cartridge boxes, which were placed into 30 cal ammunition boxes, ex G.I. ammunition cans, which held 400 rounds of 30-06 or 460 rounds of 308. One used to get them almost for nothing. They cost more now. The 30 caliber ammo cans, above mentioned are good for storing either pistol brass or loaded ammunition too, and they are virtually waterproof. LOL.
alan is offline  
Old January 20, 2000, 10:07 PM   #14
ARshooter
Senior Member
 
Join Date: June 4, 1999
Posts: 142
Try zip lock storage bages. They seal airtight and you can see through them to I.D. the brass. I put a small piece of paper in the bag to describe the brass (cal and headstamp) and what has been done to it(tumbled, deprimed, trimmed, etc). These bags are then placed in large boxes until I need them.
ARshooter is offline  
Old January 21, 2000, 11:22 AM   #15
Alan B
Senior Member
 
Join Date: August 26, 1999
Posts: 335
A local Italian restaurant sells its carry out in a plastic tub about 3 inches in Diameter and 3 inches deep. I put my brass that needs work in these. When is ready to load I put it in zip lick bags and then put the bags in 50 cal ammo cans. A 3 1/2 floppy label works great on the locking handle to tell me what’s in each can. Usually each can has one type of brass.
Alan B is offline  
Old January 21, 2000, 01:21 PM   #16
flatlander
Senior Member
 
Join Date: June 16, 1999
Posts: 120
I used to put rifle brass in shoe boxes or anything else I could find. But finding dead beetles in bottleneck cases pointed out the need to keep them in some sort of sealed container. Since my wife is a coffee junky, I use her empty 3# cans. I bought about 7000 once-fired LC 5.56 cases last winter and needed to keep them segregated as I completed prep steps. A 3# can will hold nearly 600 5.56 cases. For my 600yd. cases that are sorted by weight and neck turned, ziplock baggies work fine, since I don't put that much work into large numbers of cases, and like to keep them separated by lots of 50 or less.
flatlander is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:15 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09256 seconds with 9 queries