The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old December 8, 1999, 12:17 AM   #1
FlyinLow
Junior Member
 
Join Date: December 7, 1999
Location: Texas
Posts: 2
Carry Interarms 720 2+ inch barrel
got any good loads for those 300gr. bullets i'm seeing fellows shootin in their magnums
FlyinLow is offline  
Old December 9, 1999, 01:02 PM   #2
Paul B.
Senior Member
 
Join Date: March 28, 1999
Location: Tucson, AZ
Posts: 2,619
FlyinLow. I'm going to be as honest with you as I can. I don't think a 300 gr. bullet can be practically used in a .44 Special. Especially one with as short a barrel as you say your gun has.
I'm not trying to be a wiseguy about it. The capacity of the .44 Spl. case just does not allow a sufficient quantity of a slow enough burning powder, to give you the velocity such a heavy bullet would require to be effective. And even if you did, the unburned powder that came out of the barrel would give such a blinding ball of fire, that it would probably rival the sun's brightness at high noon.
A second drawback, is the recoil would be horrendous, to say the least.
I'm sorry. Some reloading projects just are not feasable. JMHO.
Paul B.
Paul B. is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:53 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05651 seconds with 9 queries