The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old November 17, 1999, 03:49 PM   #1
BenDover
Member
 
Join Date: October 14, 1999
Location: San Diego, CA. USA
Posts: 51
I have 2 thousand .223 LC brass I need to remove the military crimp around the primer and wanted to know if the machine from Dillon is worth buying? Thanks
BenDover is offline  
Old November 17, 1999, 09:33 PM   #2
John Lawson
Senior Member
 
Join Date: August 28, 1999
Posts: 281
I certainly think that mine has been worth the investment price. I used it yesterday morning to swage a couple of hundred military .308 cases.
One caveat: Adjust it carefully and develop a light touch. The click stops are faint, but adequate if you don't get heavy handed. If you miss the pocket and slam down on the handle, the machine has enough leverage to wreck the misaligned case.
Actually, I have tried hand and power reamers, press mounted swages and some other ideas over the years, but nothing compares to the Dillon bench mount swager, except the built in swage station on the Dillon 1050 press. And, swaging does not remove metal like a reamer, it displaces metal, and you will never get chatters that leak gas as you can with a hand reamer.
John Lawson is offline  
Old November 18, 1999, 12:02 PM   #3
Bill Hebert
Senior Member
 
Join Date: May 15, 1999
Posts: 180
I've been thinking about the Dillon also - but just haven't thrown the $ at it. I still remove the crimp with one of the Lee hand-held jobs. I can only remove 200 or so before going absolutely batty and must stop to do something else. Have you tried the Hornady hand-held crimp remover? Is it better than the Lee?
Bill Hebert is offline  
Old November 18, 1999, 01:51 PM   #4
TheOtherMikey
Senior Member
 
Join Date: October 16, 1999
Location: Surprise, Arizona, USA
Posts: 171
I got one to remove the crimps but I don't use it much anymore. Rarely I have to remove the crimps in .308 or 30-06 ammo but not usually. I soon realized it wasn't worth removing the crimps on .223 as I can ( and do) buy my .223 cases from River Valley Ordnance www.rvow.com, cleaned, trimmed, de-primed, crim removed, sized (on small base dies) and re-primed for about $68 a thousand, delivered.

Want to buy a slightly used Dillon swage?

Mikey

[This message has been edited by TheOtherMikey (edited November 18, 1999).]
TheOtherMikey is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:13 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06325 seconds with 9 queries