The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old October 29, 1999, 07:53 PM   #1
45 Fan
Member
 
Join Date: August 14, 1999
Posts: 27
Hi to all:
I am using a chronograph to develop loads for use in IDPA. I have never used a chrony before and am unsure as to how to interpret the results that I am seeing. I am loading a 230gr LRN over approx. 4.5gr of BE. I am achieving average velocities of approx. 760 feet per second. I am shooting 10 shot strings and my extreme velocity spreads are approx. 27 feet per second with standard deviations ranging 7.0 to 8.5 per string. This load seems to be pretty consistent but I am not sure how to interpret these numbers. Can anyone provide any feedback on this? Are these readings good or bad? Thanks in advance for any help given.....45Fan
45 Fan is offline  
Old October 29, 1999, 10:29 PM   #2
TLH
Member
 
Join Date: June 6, 1999
Posts: 42
I don't know if this will help much but 15 yrs ago when I was shooting IPSC the 230 LRN had to break 740 FPS to rate "Major" caliber.
The 200 SWC had to go 850 FPS. I don't know what limit IDPA has but I'd bet it's around this level.
A ten shot string is a long string. If your getting High - Low variation of 27 FPS that's excellent.
The IDPA web page probably list the required power factor. We used to multiply the bullet weight by velocity. it should give you a 6 digit number (740 x 230 = 170200) insert a decimal the digits down (in the center) had to be above 170.XXX to be major.
For what it's worth
TLH is offline  
Old October 30, 1999, 04:02 PM   #3
John Lawson
Senior Member
 
Join Date: August 28, 1999
Posts: 281
Just reviewed the IDPA web page, and the power floor for unmodified pistols is 125,000.
Multiply bullet weight times velocity, or 230 X 760 =174,800, well within limits.
A concistent chronograph reading within 50 fps is excellent.


[This message has been edited by John Lawson (edited October 30, 1999).]

[This message has been edited by John Lawson (edited November 02, 1999).]
John Lawson is offline  
Old October 30, 1999, 11:26 PM   #4
swehrman
Member
 
Join Date: October 10, 1998
Location: Kalispell, MT. USA
Posts: 26
According to the IDPA web page the 1911 in 45 falls into the custom defensive pistol catagory. This puts its minimum power floor at 165,000. So 45 fan is still above the limit, but the minimum velocity is around 718 fps.

-- Scott

[This message has been edited by swehrman (edited October 31, 1999).]
swehrman is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06718 seconds with 9 queries