The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 22, 1999, 07:25 PM   #1
Match223
Junior Member
 
Join Date: June 21, 1999
Posts: 2
Im looking for help about reloading for my Colt AR-15. It is a Target HBAR with a 20" 1:7 twist rate barrel(.223Rem). What are some good bullet and powder combos? My main goal is accuracy but it needs to be cost effective. I don't have any equipment and Im looking for suggestions on what to get. I shoot around 750-1000 rounds yearly.
Match223 is offline  
Old June 25, 1999, 01:17 PM   #2
flatlander
Senior Member
 
Join Date: June 16, 1999
Posts: 120
You shouldn't have any trouble finding a good load with any of the commercial SP, HP, or match quality bullets. If your main interest is in target shooting out to 200yds., then bullets in the 55 to 60gr range will be heavy enough. Past 200, you need to start looking at the 68-69gr bullets. If you want to hunt varmints with your AR, stick with hunting style bullets, as match BTHP's aren't made to expand. If you want to experiment out to 500+ yds, your 1/7 twist barrel will handle the 75-80gr match bullets, including the VLD designs. I've had good results with either commercial brass or LC military stuff. I would stick with either the Win. WSR or Rem.7-1/2 primers, as they have a fairly tough cup to help prevent slamfires. H335, W748, AA2230, AA2460 are just a few of the powders that work well with the light end of the bullets, while AA2520, Varget, RL-15, N135 & N140 do well with the heavier ones. One of the complete outfits from one of the quality manufacturers would be the easiest way to get into equipment. There are less expensive ways to go, but you have to be careful not to scrimp in certain areas, or you'll wind up replacing stuff right away. Loading 1000 rounds a year will amortize the cost of loading tools in less than a year, unless you really spend big bucks on tools. The best advice I can give would be for you to talk with one of your friends who has reloaded for several years and get his advice on tools, and/or find a good dealer who is more interested in getting you started in the right direction than in selling you one of everything he has in stock. Definatly get one of the loading manuals from Sierra, Hornady, Speer, Lyman or Hodgdon and look at the chapters on getting started. Once you have a grasp of what's involved, it will make it a lot easier to understand what you need in the way of tools. You can never have too many manuals - you need to compare data from several sources to help you decide on your loads. Good luck, and good shooting!
flatlander is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:47 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06076 seconds with 9 queries