The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old January 31, 2000, 11:24 PM   #1
Mesa
Senior Member
 
Join Date: January 31, 2000
Location: Athens Ga area
Posts: 131
Ask 20 people how to best clean a gun and you will get 22 or so answers. I have a Howa 1500 Lightning in .308. Once and for all, what do I need to do after shooting it at the range? AND what kind of rod, cleaner, oil et. should I use? The patches I got for it are supposedly for the .30 cal range, but I have to cut them down or they positivly will not go through. I clean and clean but the patches still come out with black on them. I always finally just give up and run a slightly oiled patch through and let it go at that. Very frustrating. Any help is appreciated!
Mesa is offline  
Old February 1, 2000, 07:00 AM   #2
George Stringer
Staff Alumnus
 
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
Mesa, a rifle should be cleaned after every 20 rounds but a lot of folks just clean after each trip to the range. This is how I clean a rifle after firing. Run a wet patch with Hoppe's #9 through the barrel and let set for 10 minutes. Then take another wet patch and make 20 passes (10 in, 10 out)followed by 3 dry patches and finally a lightly oiled patch. I use plain old Hoppe's gun oil. The best rods are one piece rods and you should use a bore guide to protect the muzzle. George
George Stringer is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:49 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06162 seconds with 9 queries