The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old December 20, 1999, 11:17 PM   #1
abruzzi
Senior Member
 
Join Date: April 23, 1999
Location: Hurricane, WV, USA
Posts: 192
I have an STI hybrid pistol chambered for 357 sig which has had almost no rounds run thru it. I have encountered a problem where the firing pin stop comes loose and drops down to block the hammer from striking the firing pin. And if I fiddle with it, the firing pin comes flying back at me.

Some guys have suggested just to keep shooting until the gun loosens up(?). Others have suggested getting a stronger spring on the firing pin to increase pressure against the stop.

Any thoughts out there?? Thanks.
abruzzi is offline  
Old December 20, 1999, 11:27 PM   #2
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,482
Loosens up? At least one part is already too loose (wasn't he a French painter?).

You might try a new firing pin spring, and that might work.

If it does not, you will need to stake the stop in place or get an oversized one and make it a tight fit.

That problem is not usually understood. It is complex and several things involving Mr. Newton's laws are going on at the same time.

Jim
James K is offline  
Old December 20, 1999, 11:28 PM   #3
Mikey
Senior Member
 
Join Date: November 14, 1998
Location: Tennessee
Posts: 885
There is definitely something wrong!

Either the firing pin spring is waaaay to soft or the firing pin is sticking in the hole while in it's forward position during firing. Either way, have a smith look at it right away. If the pin is sticking you could possibly go full auto when you least expect it!

Mikey
Mikey is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:16 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06514 seconds with 9 queries