The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old September 5, 2005, 11:15 AM   #1
flstfi
Member
 
Join Date: March 28, 2005
Location: California
Posts: 44
38 Special & .357 Rifle Loads

I recently started back reloading. I have a Ruger#1 chambered in .357 mag. I want to make it a tack driver at 100 yards. I have a good parallex correcting scope. The oiny thing missing is a reliable load. I tried 18 grs of H110 pushing a 125gr jhp and its all over the paper (4 inch group). ANY SUGGESTIONS????
flstfi is offline  
Old September 5, 2005, 11:37 AM   #2
Robert M Boren Sr
Senior Member
 
Join Date: December 29, 2004
Location: NW Montana
Posts: 267
Try the 158 gr bullets or the laser cast 180gr bullets behind 2400, or W231. You should get good results from that combo.
Robert M Boren Sr is offline  
Old September 5, 2005, 11:37 AM   #3
grendelbane
Member
 
Join Date: August 8, 2005
Posts: 66
My first suggestion would be to try a heavier bullet. I would try a 158 and a 180.

Heavier bullets are usually longer, which may make for a better relationship to the twist of your rifling.

Heavier bullets will also usually give better terminal ballistic performance when shot from a rifle length barrel.

If you go to cast bullets, there are some heavier designs available.
grendelbane is offline  
Old September 5, 2005, 01:28 PM   #4
k in AR
Senior Member
 
Join Date: October 12, 1999
Location: Arkansas USA
Posts: 434
I have always had the best results with the 357 in a rifle using max (or near max) charges on slow powder (I.e. a full case powder) with 158gr and up weight bullets. 296 was always good but your H110 is also very nice, and the Speer 180gr Silhouette bullet really flies nice. Speer manual # 12 is a good place to start.
k in AR is offline  
Old September 5, 2005, 01:49 PM   #5
jacobtowne
Senior Member
 
Join Date: July 14, 2005
Location: New England
Posts: 277
I agree about using slower powders. I've been using Blue Dot in .357 loads for more than 20 years. Excellent stuff and clean burning.
JT
jacobtowne is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:54 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06699 seconds with 9 queries