The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old July 2, 1999, 11:27 AM   #1
kraMrD
Member
 
Join Date: July 1, 1999
Posts: 55
I just purchased a Stainless Steel / Black Synthetic stock Ruger 10/22... I also own an AR15... the AR15 breaks down very easily for intricate cleaning?

What is the recommended cleaning procedure for a 10/22? Do you have to disassemble it down to its basic components like my AR15?

All I've been doing is cleaning the barrel and swabing the action, where I can acces it through the ejection port, with Q-tips.

Any suggestions?

Mark
kraMrD is offline  
Old July 2, 1999, 04:51 PM   #2
George Stringer
Staff Alumnus
 
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
kramrd, I wouldn't take it apart any farther than what your owner's manual calls field stripping or than their maintenance instructions call for. You'd be surprised at how many of these come to me in a paper sack to be reassembled. If you don't have an owner's manual, let me know and I'll send you the procedure to field strip the rifle. George
George Stringer is offline  
Old July 4, 1999, 04:56 PM   #3
dundee
Senior Member
 
Join Date: December 6, 1998
Location: mytown,mi,usa
Posts: 162
Something that is easy any gets most of the crud out is to remove the stock form the action, then use 'gunscrubber' to blast out the crud. Spray in a little lube and reassemble. I do this every 1000 rounds or so.
dundee is offline  
Old July 5, 1999, 11:25 PM   #4
DonL
Senior Member
 
Join Date: November 6, 1998
Location: Michigan
Posts: 217
You guys clean your 10/22's? Wow, no wonder mine is spitting hot powder out of the ejection port.

------------------
Don LeHue

The pen is mightier than the sword...outside of arms reach. Modify radius accordingly for rifle.

[This message has been edited by DonL (edited July 06, 1999).]
DonL is offline  
Old July 6, 1999, 02:48 AM   #5
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 16,830
I have a friend who didn't clean his for 10 years. He complained about it being a cheap gun when it started jamming one day.

I field strip mine per the manual and will do a detailed cleaning about once a year...if used heavily.

------------------
Vigilantibus et non dormientibus jura subveniunt


4V50 Gary is offline  
Old July 6, 1999, 07:32 AM   #6
kraMrD
Member
 
Join Date: July 1, 1999
Posts: 55
Thanks for the info guys,

Thanks George, I got your e-mail... very helpful

Mark
kraMrD is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:23 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06207 seconds with 9 queries