The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old April 7, 1999, 02:29 PM   #1
BrianC
Junior Member
 
Join Date: April 6, 1999
Location: Roxboro, NC
Posts: 1
Hello All,
I am new to both the web and this board. I am graduating from Piedmont Community College, in Roxboro, NC, in May 99. Therefore, I am looking for a position as a gunsmith. Location and shop size are both open. I am a S&W Certified Armorer for both revolver and auto, and have all the normal hand tools. Any help any one may be able to give me in pointing me in the right direction would be much appreciated.
I can be reached at ncgunner@netscape.net

BrianC is offline  
Old April 7, 1999, 11:13 PM   #2
George Stringer
Staff Alumnus
 
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
Brian, contact Brownells and ask for the Tech Staff. (515) 523-5401. Brownells publishes a Newsletter about every three months and it always has a few "Help Wanted" entries. There were four postions open in the last issue that came out about two weeks ago. I wish I could afford to hire you. Good Luck. George
George Stringer is offline  
Old April 15, 1999, 01:17 AM   #3
Ken Cook
Senior Member
 
Join Date: March 4, 1999
Location: Hot Springs AR. USA
Posts: 265
Brian,
Listen closely and you can hear the sound of my bitter laughter echoing through the forum!

Mostly kidding!
Actually, you'd better get used to the idea that most gunsmith's can't afford to hire another pair of hands. They're making enough for them to keep thier family comfortable, but usually not enough to pay someone else too.
The solution? (You ain't gonna like it.)
Get a job. You know, the kind that's no fun but puts food on the table and maybe a little extra to put back towards your own business.
That's the slow way, but it's usually the only way. Sometimes you get lucky and find a shop that needs a smith badly enough to pay you a decent wage.
Usually what happens though, is that a gunshop want's to advertise as a "Full Service Gun Shop." This means they need a smith in residence. The Shop owner could do it, but he knows something you don't.
He knows that for every guy that walks in the door wanting a full blown bells and whistles custom gun creation, there are going to be 2000 jerks walk in with a 20 year old Glenfield .22 semiauto. The rifle this guy brings in, is identical to the other 1999 .22 that your going to see. They all;
1. Have NEVER been cleaned. (Granpa tol' me you don't have to clean .22s!)

2. Have a visibly bulged barrel where the proud owner (standing in front of you swearing it wasn't him.) Had a bad round get stuck in the chamber , and the Genius decided to "just go ahead and shoot it out!"

3. Be only one of different production runs of the same rifle, but nevertheless, parts are NOT interchangable.

4. Be worth about 10 bucks. (sentimental value means nothing on the invoice.)

Last, this guy, like the other 1999 will think you're going to take this POS and turn it into a shining example of the Gunsmith's art. Reblue, rework, rebarrel, and CLEAN, and he thinks you're going to do it for 15 dollars. When you tell him what it's really7 going to cost, he is going to offend you.
Believe me, it ain't all roses.
BTW I have a sign over my bench which is visible to ALL customers.
"I do NOT fix junk guns. If you can't sell it for over 100 dollars, take it to someone else."
I've lost a few "customers" because of this sign, and that's exactly what I meant to do.
I don't have to try and fix that Glenfield or that RG.
Why don't I want to work on these? Are they too hard to fix?
No, they're just not worth it. You can work on this stuff for 80 hours a week and starve to death on what you're not getting paid.
I'm not trying to bum you out or turn you off, but I do want you to be aware that there are major pitfalls out there. Be careful!
BTW, Congratulations on your graduation! Now you know enough to really start learning!
Have fun and remember, there's always more to learn.


------------------
Your mind is your primary weapon.
Ken Cook is offline  
Old April 15, 1999, 04:05 PM   #4
Morgan
Senior Member
 
Join Date: October 29, 1998
Posts: 945
You may want to contact police/sheriff departments in your area or anywhere you're willing to relocate - especially departments that issue Smiths.
Morgan is offline  
Old April 15, 1999, 08:52 PM   #5
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,951
When I first started working as a gunsmith, I swore the area had the smartest kids in the world. I don't know how many guys brought in guns, from .32 American to Lugers, in bags and told me "the kid took it apart." In some cases, I knew the kid was only 3 years old, or maybe 5, and I thought a 3 year old kid has to be smart to take a Luger apart, even if he can't put it back together. Of course, he usually lost a few parts.
James K is offline  
Old April 17, 1999, 12:38 PM   #6
zot
Senior Member
 
Join Date: April 2, 1999
Location: U.S.A.
Posts: 566
one option you might like is enlisting in
Army and showing them your talents, you'd
make good money and they would increase your
knowledge,3 hots and a cot and a job that
you;d like, also after you put your time in
you'll have a esier time getting gunsmith
job with Army experience behind you.
zot is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06533 seconds with 9 queries