The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old February 5, 2000, 03:28 AM   #1
JoeW
Junior Member
 
Join Date: January 19, 2000
Posts: 2
What is the best aftermarket mag for the Mini-14? I don't own one yet and am trying to pick up some hi-caps.

I have already purchased two Eagle 35rndrs. I have seen ads on Gunbroker for Precision, and Federal Ordinace, both saying that they are the best.

Any experience with these mags??
Thanks in advance!!
JoeW is offline  
Old February 5, 2000, 01:16 PM   #2
ironmike
Member
 
Join Date: January 23, 2000
Posts: 15
The best is a factory Ruger, if you can find one. Barring that, the only other ones with which I have experience are PMI, KKK and USA. The only one worth buying is the PMI. The other two brands are junk. If you buy these, you'll spend most of your time trying to get them to fit and/or feed. Out of the ten that I bought only 5 worked, and all had stoppages. I have 5 PMI's which all fit and feed without problems. The only drawback with the PMI's are that the feed lips are not hardened, and bend easily if dropped. Hope this helps.
Mike
ironmike is offline  
Old February 5, 2000, 05:18 PM   #3
Mike Baugh
Senior Member
 
Join Date: October 28, 1998
Location: Indiana
Posts: 405
I agree with Ironmike , use either factory or Precision [PMI] . I have never had trouble with the PMI Mini 14 Mags . Good luck , Mike...
Mike Baugh is offline  
Old February 5, 2000, 05:50 PM   #4
Gino
Senior Member
 
Join Date: October 14, 1998
Location: WPB, FL USA
Posts: 911
I only buy PMI mags for my mini! No problems whatsoever.
Gino is offline  
Old February 6, 2000, 02:58 AM   #5
mhannah1
Member
 
Join Date: June 25, 1999
Posts: 66
Ive had both good and bad luck with just about every brand of mag for my Mini.

Yes, I even have a 40 rd USA mag (which is supposed to be junk) and it works perfectly.

Wherever you buy 'em, just make sure they will refund your money (or exchange it and/or give you credit) if it doesnt work properly.

------------------
Mark Hannah
Web Page Design
Surplus Electronics
mhannah1 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07763 seconds with 9 queries