The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old July 12, 2005, 03:38 PM   #1
denfoote
Senior Member
 
Join Date: November 12, 1999
Location: Buckeye Arizona
Posts: 5,526
Thinking about reloading.

I'm thinking about getting into reloading.
I've pretty much have decided that, if I do it, I'm gunna get the Dillon "Square Deal B". Since it only comes from Mike set up to do one caliber, I still have to decide what sub model to get.

Now comes the load of questions!!
What else do I need to get?? (This is the main question)
Is 9mm worth it to reload??
How much space am I gunna need for this? (I live in an upstairs apartment.)
What sort of savings on ammo am I likely to see and how soon will I see it??

That pretty much covers it for now!!
__________________
Ich bin kein Nationalsozialist!!!!!!
Ich bin Republikaner!!!!!!!!
Neca eos omnes. Deus suos agnoset.
Arizona: Flush the Johns!!!
denfoote is offline  
Old July 12, 2005, 03:45 PM   #2
Brian Williams
Senior Member
 
Join Date: September 4, 2001
Location: Lancaster, PA
Posts: 1,251
Quote:
What sort of savings on ammo am I likely to see and how soon will I see it??
NONE, You will just shoot more.

Quote:
What else do I need to get??
2 or 3 reloading manuals
powder scale


Quote:
How much space am I gunna need for this?
get the press and a C clamp and clamp it to your desk or table.
__________________
Brian
<><
Brian Williams is offline  
Old July 13, 2005, 09:22 PM   #3
Ben Shepherd
Senior Member
 
Join Date: August 11, 2001
Location: Utah
Posts: 1,462
Mr. Williams hit it on the head for the minimallist approach.

LIKE HE SAID--TWO OR THREE MANUALS for crosschecking data. We'd hate for a typo to get you hurt or killed.

Above all- When you start loading, if you have questions, no matter how stupid or trivial they may seem, ASK.

In fact they make a load book specifically for 9mm. It has data from all major mfgs. You should be able to pick it up for under 10 bucks. And it's small, too. Help save that precious space in a cramped environment.
__________________
From my cold dead hands.........

NRA certified rifle, pistol and shotgun instructor.
Hunter education instructor
Ben Shepherd is offline  
Old July 13, 2005, 09:36 PM   #4
BigSlick
Senior Member
 
Join Date: January 25, 2005
Location: Texas of course
Posts: 277
A case check guage, and a dial caliper/micrometer will be helpful.

One thing to consider, the SDB is complete with one set of dies, but the dies are not standard 7/8x14 dies. They are specific to the SDB. No biggie if all you ever plan to load is pistol, but if you hope/plan to load rifle in the future, go with the 550B. Just a few bucks more up front, for a ton more options and flexibility.

Just a thought

BigSlick
__________________
Nobody likes war, but if you find yourself in one - fight for those you serve with and to make the trip home. Show mercy to those that deserve it and a relentless, ruthless, cunning evil to those who don't.
BigSlick is offline  
Old July 13, 2005, 10:18 PM   #5
b_ionian
Junior Member
 
Join Date: July 11, 2005
Posts: 7
I agree with the post to get a caliper. I can't imagine being without mine. How else are you going to measure over-all cartridge length? This is important for proper chambering and avoidance of excessive pressure.
b_ionian is offline  
Old July 14, 2005, 12:28 AM   #6
Smokey Joe
Senior Member
 
Join Date: July 14, 2001
Location: State of Confusion
Posts: 2,052
Starting reloading--Hurrah!

Denfoote--First of all, welcome to The Magnificent Obsession! I mean reloading.

I don't blame you for your bewilderment as to what you need/want/should have/don't need/etc. There is a welter of stuff out there. So before you try buying anything, before you can start cranking out those lovely rounds, you need to STUDY UP. Yeah, I know. BO-ring! And supposedly the Dillon equipment comes with complete directions. But...

But we are dealing with some nasty hot gases here, and some fiendish pressures, and the thing you never want to do is end up proving that the lab geeks who wrote the loading manuals were right after all. Doing that generally ruins your Old Betsy for starters, if not you too.

THE BEST primer, IMHO, for newbies--and old hands too--is
The ABC's of Reloading which is newly out in a 7th edition. Get it from your local gun shop, a gun show, on the I'net, or from the publisher, www.krause.com It will explain what to do, what not to do, and what stuff you actually need to get started. Finding a friend who reloads is a great help--reloaders are almost always pleased to indoctrinate beginners, and forums like this are an excellent place to get questions answered.

But there is nothing so comforting as having directions right there in front of you in black and white when you're trying to get started. Having digested the ABC's, you also want a loading manual. This is a book of recipies for various loads. Most of the bigger manuals contain a how-to, but they're nowhere near as thorough as the ABC's. If you only get one of the major load manuals, I suggest the Lyman 48th edition. www.lymanproducts.com If you do one caliber ONLY, there may be a loadbook of recipies just for that, The Complete Reloading Manual for (fill in cartridge) put out by www.loadbooks.com If so, it is ONLY recipies, no how-to at all.

Anyhow, once again, welcome. When you get it all sorted out it's an essentially simple operation we do. It's the sorting out that gets tough. May you enjoy reloading for many years.
__________________
God Bless America

--Smokey Joe
Smokey Joe is offline  
Old July 15, 2005, 02:48 PM   #7
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,105
needed stuff

Safety glasses; always. Always.

Cheap (but not LEE) scale; get a weight check set and use it EVERY time you set up your scale. (scale, between $30--50; check set about $20)

LEE chamfer tool; allows deburring case mouths, 'enhancing' primer pockets. (about $3)

Dial caliper; metal, though. (about $25)

Boxes for your now-loaded ammo; recommend MTM 50-rd plastic hinge-top. (cheap)

Lyman Reloading Data Log book; worth the time to record what you've done. (can make one outta construction paper; $1)

And wear them glasses every time you touch your 'stuff'.
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Old July 16, 2005, 08:07 PM   #8
denfoote
Senior Member
 
Join Date: November 12, 1999
Location: Buckeye Arizona
Posts: 5,526
Thanks guys!!
__________________
Ich bin kein Nationalsozialist!!!!!!
Ich bin Republikaner!!!!!!!!
Neca eos omnes. Deus suos agnoset.
Arizona: Flush the Johns!!!
denfoote is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:39 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07692 seconds with 9 queries