The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old April 18, 1999, 11:01 AM   #1
Rich Lucibella
Staff
 
Join Date: October 6, 1998
Location: South Florida
Posts: 10,165
I guess most of you know that Kevin McClung is my favorite knifemaker. (He's also a fair teacher, advisor, gunsmith and friend ).

Some time ago I purchased a one of a kind Mad Dog short sword at auction...it was dubbed "The Warlord" by The Creator. As the work was still in progress when I purchased it, I took the liberty of faxing my hand print to Mr. Dog. One day later, he called to inform me that my hands are somewhat mutated in size and proportion. (Seeing as they're my hands, I have always been vaguely aware of this fact.)

Kevin suggested that I come out to the Mad Dog shop to have the two handed grip custom fitted. An opportunity like this doesn't present itself more than once in a lifetime; so off I went, Moderator Mykl in tow.

Well, I told you all that to tell you this: If interested in graphics of the process, kindly proceed to www.thefiringline.com/gif/WarLord1.html

If interested in the Mad Dog line of edged weapons and other implements of destruction, kindly proceed to www.mdenterprise.com/ .

Thanks Mr. Dog!
Rich

[Note: This message has been edited by Rich Lucibella]
Rich Lucibella is offline  
Old April 18, 1999, 11:50 AM   #2
David Schmidbauer
Retired Screen Name
 
Join Date: November 17, 2000
Posts: 396
Rich;

Thanks for the Link to Mad Dog's page. A friend mentioned a type of knife I've been interested in and there it was!

Now. If Mr Dog would e-mail me I've got a ? concerning the Mirage-X Micro and the sales limitation on this.

------------------
Schmit, GySgt, USMC(Ret)
NRA Life, Lodge 1201-UOSSS
"Si vis Pacem Para Bellum"


David Schmidbauer is offline  
Old April 18, 1999, 12:10 PM   #3
Mal H
Staff
 
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 14,541
Rich, thanks for including the photos. That had to be a fascinating session in Mad Dog's shop. I have always loved to watch true craftsmen at work. I even sat and watched for hours as a worker at a plywood plant cut out, by hand, those little ovals that cover the knots - a simple job, but he was so exacting in his work it was almost an art.
Mal H is offline  
Old April 18, 1999, 01:42 PM   #4
Scott Evans
Staff Alumnus
 
Join Date: December 7, 1998
Location: Jacksonville, NC
Posts: 1,380
Rich,
Looks like a serious tool … Great photos. It’s good to be able to put a face with your name (the Mad Dog as well). By the way did you get a sheath with your sword? If so I’d love to see that as well.
Scott Evans is offline  
Old April 19, 1999, 09:42 PM   #5
Rich Lucibella
Staff
 
Join Date: October 6, 1998
Location: South Florida
Posts: 10,165
Scott-
The sword comes with a slip-type sheath with regularly spaced holes the entire margin. This allows for some degree of imagination in attachment.
Rich

[This message has been edited by Rich Lucibella (edited April 19, 1999).]
Rich Lucibella is offline  
Old April 21, 1999, 01:18 AM   #6
fubsy
Senior Member
 
Join Date: May 20, 1999
Posts: 1,361
There is another custom knife (there thousands), but this man makes hi quality and unique designs.....if you get a chance look up Walter Brend, Walterboro, SC...Ive his number and address some where---but Ive been out of custom knives bout 5 years or so.....still admire em though...fubsy.
fubsy is offline  
Old April 24, 1999, 10:29 PM   #7
Rob Pincus
Senior Member
 
Join Date: October 9, 1998
Location: Hotels
Posts: 3,677
DAvid,

If your question is very technical or specific to his sales policies, you will have to talk to MR. Dog, of course, but if you want an unbiased opinion of the Mirage-X knives and to hear the results of my testing of the knife and its unique abilities, just Email.
Rob Pincus is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06803 seconds with 9 queries