The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 21, 1999, 09:42 AM   #1
bookkie
Senior Member
 
Join Date: March 5, 1999
Location: Arbuckle, CA, usa
Posts: 1,269
I've found a site that is selling military surplus powder WC820, $56 for 8lbs. Does anyone have any experience with this powder. Site says to use the same tables for loading as 2400, WIN 296 or H110.

Thanks,

Richard
bookkie is offline  
Old June 11, 2005, 04:37 PM   #2
drfut21311
Junior Member
 
Join Date: June 11, 2005
Posts: 2
wc820 surplus powdeer

Yes, I've used this great bargain powder in 410 shotshell hulls, HS and AA with an orange pattern control wad, winchester 209 primer, 1/2 ounce of #9 shot utilizing 13.2 grains. It works superbly and I found the recipe in various places on the net.

Think about it. If you order four 8 lb. bottles the company from which you purchased the powder will pay the hazmat fee. You'll only need to pay shipping.

Let me know if you need the company's name from which to order the powder. This is a ball powder very much like Hdgdon's H-110.

Good shooting.
drfut21311 is offline  
Old June 11, 2005, 05:18 PM   #3
Leftoverdj
Senior Member
 
Join Date: October 15, 2004
Posts: 934
Bookkie, use AA-9 data, at least to start. Recent batches of WC 820 have had that burning rate. Some of the earlier batches were of H 110 burning rate, but you can get in a lot of trouble if you use that data with a faster lot.

There is also a WC 820(f) which is faster yet and has a rate about like HS-7.
Leftoverdj is offline  
Old June 11, 2005, 06:35 PM   #4
Desert Dog
Senior Member
 
Join Date: September 22, 1999
Location: Dallas, TX
Posts: 473
WC820 is a fine powder that I use for .45 Colt loads. The 8# batch I received duplicates H110 burn rates almost exactly.

But like Leftoverdj said, be very conservative when you first start loading with it to determine the burn speed...
__________________
.45 Super... Fat and FAST... but for real firepower, .45 Blackhawk!

Yes, in fact I do have a 454... in more ways than one.

"No provision in our Constitution ought to be dearer to man than that which protects the rights of conscience against the enterprises of the civil authority" - Thomas Jefferson
Desert Dog is offline  
Old June 11, 2005, 06:53 PM   #5
EchoFiveMike
Senior Member
 
Join Date: February 12, 2000
Posts: 416
Speed varies, as has been said, different lots range in speed from H110 all the way to AA#7. Most current stuff is said to be similar to AA#9 or 2400 in speed. I've got 16lbs I'm storing, but haven't used any yet. Still have a 20lb keg of 2400 I'm working through S/F....Ken M
EchoFiveMike is offline  
Old June 12, 2005, 08:58 AM   #6
pearson1662
Member
 
Join Date: June 4, 2004
Posts: 52
milsurp powder

How old is the powder and what effect does this have on it?
What difference does "pulldown" make?
pearson1662 is offline  
Old June 12, 2005, 01:21 PM   #7
Leftoverdj
Senior Member
 
Join Date: October 15, 2004
Posts: 934
I dunno the age, but properly stored powder has a very long life. I avoid pulldown because improper storage is more likely with loaded ammunition and because there have been cases of different powders becoming mixed during the pulldown process. Makes me nervous even though the powders would have been of very similar burning rate.
Leftoverdj is offline  
Old June 12, 2005, 04:56 PM   #8
Kamicosmos
Senior Member
 
Join Date: January 31, 2002
Location: Kansas City, Missouri
Posts: 193
I'll try to remember to get my lot number and edit this post when I get home.

But my 8 pound jug burns like AA#9.

It's a decent powder, but yes, start very conservative on your charges until you figure out it's burn rate.

That said, while it is a 'good deal' I don't think I'll be messing with the pulldown powders any more. I'll shell out the extra money to get the commercial stuff. I like consistancy and published data for my powders.
YMMV.
__________________
"Dreams only have meaning because we struggle in the waking world."

-- Major Motoko Kusanagi GitS:SAC

Member of NRA and Western Missouri Shooters Alliance
Kamicosmos is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:02 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07136 seconds with 9 queries