The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old January 20, 2005, 11:54 PM   #1
rabristol
Junior Member
 
Join Date: January 12, 2005
Posts: 1
using .357" handgun bullets in .35 Remington

My intentions are to use a .357" handgun bullet in my 35 remington pump rifle.
The 35 Remington is .358" so when I size my necks, the necks will be .357" which is .001" too small. The result is a loose bullet in the case. This is my idea: I install a sizer pin from a .357 die and this should size my neck to the correct size. Is this correct? Help me out!

Thanks,

RIck
rabristol is offline  
Old January 21, 2005, 06:12 AM   #2
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,270
vapor trails

Pistol bullets won't withstand rifle velocities; mebbe okay for plinking.
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Old January 21, 2005, 06:25 AM   #3
steveno
Senior Member
 
Join Date: June 18, 2004
Location: Minden , Nebraska
Posts: 1,284
do you have some 357 mag dies? try just sizing and expanding the neck of the 35 remington cases with them. also try removing the expander out of the 35 remington dies and see if a .357 dia. bullet is tight
steveno is offline  
Old January 21, 2005, 08:37 AM   #4
.45 Vet
Senior Member
 
Join Date: May 21, 2004
Location: Western Penn.
Posts: 370
As a lark, I loaded .357"--125 JHP"s for my Rem-141 years ago. I loaded them into the rifle single shot for plinking. Never gave a thought to swapping out the expander plugs. Might be a worthwhile idea.

These rounds are highly explosive on water-filled 1gal. milk jugs, please don't use them for hunting anything but varmits. The pistol bullet jackets are just too thin for rifle velocities...
__________________
For those who've never fought for it, the price of freedom shall never be known...
.45 Vet is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:41 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06812 seconds with 9 queries