The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Thread Tools
Old October 18, 2004, 06:08 PM   #1
Junior Member
Join Date: October 16, 2004
Posts: 5
have i stumped everyone?

nobody knows how to remove the magizine tube off a 1894 marlin?? ...... cant figure it out pleeeeze help me
dviant is offline  
Old October 18, 2004, 10:27 PM   #2
David Berkowitz
Senior Member
Join Date: November 10, 1999
Location: Yucaipa, CA USA
Posts: 214
You might try posting your question under Black Powder and Cowboy Action Shooting.
If that doesn't work, go to
If that doesn't work, try
and if that doesn't work, I give up.
Hope that helps.
David Berkowitz is offline  
Old October 18, 2004, 11:56 PM   #3
Senior Member
Join Date: August 17, 2001
Posts: 838
Have you tried soft rubber coated pliers with a tight fitting dowel or soket in the tube to keep it from collapsing, and then turning it! I do believe they are threaded in the receiver. But first l'd soak it with some Kroil or wd or something like that, odds are there is some corrosion in there.

If all else fails try a gunhack, I mean a gunsmith.
.45 ACP
Because no matter how you try to rationalize it, 9mm is still for women and pansies.

Build a bridge, and...GET OVER IT!
Samuel2001 is offline  

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 07:21 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.04569 seconds with 9 queries