The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old July 13, 2004, 04:57 PM   #1
drdirk
Senior Member
 
Join Date: July 1, 2004
Location: houston, tx
Posts: 172
Pietta Service / Spare parts

I have a 58 Remington SS made by Pietta BP revolver. The little part and spring that advances the cylinder (sorry, I am new at this, can't think of a better description) broke. So the Cylinder does not advance due to the broken spring. I sent emails to Cabelas without a reply. Called, they did not know and since it is out of warranty no help.

Anybody know how to get parts for the gun?

Thanks!
drdirk is offline  
Old July 13, 2004, 09:33 PM   #2
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 17,105
You may contact Alessandro Pietta at

fap@spidernet.it

He's a member at THR under the name of alchimista
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old July 15, 2004, 04:27 PM   #3
RobW
Senior Member
 
Join Date: December 15, 2000
Location: Henderson, NV
Posts: 256
Try www.vtigunparts.com they have everything Pietta and Uberti, or use Dixie Gun Works www.dixiegunworks.com.

I ordered some spareparts from vti, especially the hand-assembly (exactly what your problem is) because it is known to give problems (when the revolver gets sooted and the cylinder is very hard to rotate).

Alessandro Pietta is one of 2 sons of Guiseppe (?) Pietta that run the company. In the last few years, it looks like they catched up to the quality of Ubertis, known as the best Italian revolver replicas.

For rifles, I think it's still Pietro Pedersoli.

THAT STUFF IS ADDICTIVE!
__________________
We learn from our experience that we don't learn from our experience.
RobW is offline  
Old July 16, 2004, 11:05 AM   #4
drdirk
Senior Member
 
Join Date: July 1, 2004
Location: houston, tx
Posts: 172
thanks

Just went to the VTI web site and ordered the parts. They have nice drawings of the guns and it looks easy to order. Got two while I was on it.

Thanks for your suggestion!
drdirk is offline  
Old July 23, 2004, 10:41 AM   #5
mec
Senior Member
 
Join Date: December 6, 2001
Posts: 1,530
Hopefully VTI will have this part. If not, you might find that a Uberti will work. Uberti parts are readily available from several reliable sources.
Numrich Gun Parts lists nothing for the Pietta except a Kartridge Konverter and a schematic. They do have parts for the Army Colt listed but all of the essential ones are astericed as "Sold Out."
Dixie appears not to have any parts for these but It's a bit hard to find specific items with their search engine.



There appears to be no factory service available from FAP Pietta.

Last edited by mec; July 24, 2004 at 01:38 PM.
mec is offline  
Old July 23, 2004, 07:05 PM   #6
drdirk
Senior Member
 
Join Date: July 1, 2004
Location: houston, tx
Posts: 172
no response from Pietta

Thanks to good suggestions, my Pietta is up and shooting again ( for now at least). Without this forum, I would have a hunk of metal now, Pietta did not respond at all. I guess they are more interested in customers that use them for display only and not actually load it up and shoot

BUT thanks to this threat and my other threat on how to get the cylinder to turn after a broken hand that was a little too long and the wrong shape was matched, it is working again. Too bad that no "normal" firearm support exist.

Cheers!
drdirk is offline  
Old July 23, 2004, 08:07 PM   #7
mec
Senior Member
 
Join Date: December 6, 2001
Posts: 1,530
Even so, you may find yourself with a nasty black powder habit. Mine was low grade for decades and then emerged as a full blown addiction. I have a navy that was probably manufactured by Pietta, sent to this country for sale to either Colt or another concern that wanted to put its own cosmetics and markings on it and then rejected by the US buyer. It was part of a batch a local guy bought up. No finish, no front sight, brittle trigger spring and bolt and a 6 pound trigger pull Pietta spare parts- available in an expensive kit from either Brownelles or Numrich (and apparently almost nowhere else.) dropped in with no fitting. Still has the 6 pound trigger and chambers don't line up particularly well with the barrel but it shoots very well anyway.


This year, I picked up a 1858 Remington and a 1860 army newly made by Uberti. I was amazed at the quality of them. The chambers line up, the parts are well fitted and finished and the bore/ chamber measurements are perfect. On top of that, Cimarron, VTI Taylor and Uberti all keep spare parts and have in house service departments for repairs. This is unpresidented in the replica industry and I hope it lasts. A good strategy if you get the itch for another revover is:
1. put in a spare parts order ( springs, screws-hand and bolt) for the specific model before you buy it. If they come youre in business. Spare parts are completely necessary for these designs as flat springs tend to break even when heat treated right. Shooters often find out about this only after buying the guns. It is good to read the black powder annuals and magazine articles but they generally omit the realities of black powder shooting in order to sell more guns for their industry supporters. The gunwriters will have you believe that all of the black powder revolvers are miracles of industrial integrity and you have already found out this isn't true.

2. Examine the gun if possible. Even with current quality control, specific examples of the Ubertis vary in smoothness and functionality. Otherwise, order direct from Cimarron or Taylors and examine upon arrival.

Last edited by mec; July 23, 2004 at 09:22 PM.
mec is offline  
Old July 23, 2004, 08:22 PM   #8
drdirk
Senior Member
 
Join Date: July 1, 2004
Location: houston, tx
Posts: 172
good advice!

You certainly know your stuff. Thanks for the valuable advice. Had I know more, I probably would have bought a Uberti. BUT at least the Pietta made me learn a lot, disassembly, fixing parts, powder charges, Grams / Grains... boy, I could almost fool myself into thinking I know something Well, even if I don't you do! After shooting cartridge for 30 years I am loving the BP stuff
drdirk is offline  
Old July 23, 2004, 08:34 PM   #9
mec
Senior Member
 
Join Date: December 6, 2001
Posts: 1,530
Its like an archeologist staggered along the base of Mt Horeb and stubbing his toe against Another Ten Commandments that everybody had forgotten about.

Quite a sense of accomplishment taking the thing apart and making it work In'it?
mec is offline  
Old September 8, 2004, 11:14 AM   #10
Cap n ball
Senior Member
 
Join Date: October 17, 2000
Posts: 247
We discussed this over at THR awhile back. Piettas are getting much better. I bought one about ten years ago and the first thing to break was the hand spring. My gunsmith was able to replace the spring with one he made from flattened piano wire. Just about everything else that could break or wear out eventually did. It is a brass frame Remington. I thought it looked cool but didn't realize until later how fast brass wears. I still think it looks kinda cool as a wallhanger.
Cap n ball is offline  
Old September 9, 2004, 10:28 AM   #11
mec
Senior Member
 
Join Date: December 6, 2001
Posts: 1,530
VTI stocking the parts could be a real boost for Pietta owners. They are even planning to stock LeMat Parts on this side of the atlantic and got a batch of spares for me recently. Pietta can make a good gun. The LeMat has all the design related peculiarities of the originals and they can be overcome. The total lack of customer support, spare parts etc has probably kept most owners from shooting them very much but this could be about to change. My revolver is well made and accurate as was an earlier one I had.
mec is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:30 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.10822 seconds with 9 queries