The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old October 14, 2002, 09:43 PM   #1
leftover
Senior Member
 
Join Date: May 27, 2002
Location: IN
Posts: 172
Vibratory Cleaner

I'm in need of a vibratory case cleaner, but know very little (i.e. nothing) about them.

I want to be able to clean about 100 30-06 cases at a time, ideally with a little rooom to spare.

Any suggestions as to the best models & best value deals out there at the moment ?

I value durability, noise is not a concern.

Thanks in advance for the sage advice !
leftover is offline  
Old October 14, 2002, 10:11 PM   #2
sricciardelli
Senior Member
 
Join Date: August 13, 2001
Location: Montana
Posts: 489
Lyman 2200 with the auto-flo
__________________
http://stevespages.com/page8.htm
sricciardelli is offline  
Old October 14, 2002, 11:15 PM   #3
blades67
Senior Member
 
Join Date: April 22, 1999
Location: Chandler, Arizona, USA
Posts: 6,014
Get the cheapest one you can find in the Midway or Brownell's catalog.
__________________
Guns cause crime like spoons cause Rosie O'Donnell to be fat!

I hunt, therefore I am.
blades67 is offline  
Old October 15, 2002, 05:54 AM   #4
dick w. holliday
Senior Member
 
Join Date: January 13, 2001
Location: NC
Posts: 589
i'd stay away from the Midway--i bought one and it broke after a few days and was repaired......got it back....lasted a few more days and broke again.....Midway refunded my money (good folks to deal with)....bought the small Dillon....been running for years now with no problems......Dick
dick w. holliday is offline  
Old October 15, 2002, 08:27 AM   #5
Mal H
Staff
 
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 14,504
I will echo Steve's recommendation of Lyman's cleaner. Mine has several thousand hours on it without a single problem. (Of course, having said that, it will break down tomorrow.)
Mal H is offline  
Old October 15, 2002, 09:30 AM   #6
Southla1
Member In Memoriam
 
Join Date: March 19, 2000
Location: Jeanerette, La. Near the
Posts: 1,999
I have a Lyman "Turbo Twin" and all I can say is "it gets after it"!

The ONE complaint I have about it is it has no switch..........you have to plug or un-plug it to turn it on or off...........asides from that I am totally pleased.
Southla1 is offline  
Old October 15, 2002, 04:26 PM   #7
loach
Member
 
Join Date: February 20, 2002
Location: Columbia, SC
Posts: 38
I've had the Midway for about a month now (I know that's not a lot of time), and have not had any problem with it. The rotary media seperator is a good idea as well. The switch is convenient and it seems well built.

Perhaps I've had good luck with it because I've not run it for more than 90 minutes at a stretch and have let it sit for 15-30 minutes before turning it back on. Having read many posts here before buying one it seemed that most people who had one fail had it fail after using it continuously for long periods or running it when it got hot. Since I'm usually only tumbling one batch a day, this precaution hasn't been inconvenient.
loach is offline  
Old October 15, 2002, 04:31 PM   #8
Krautguns
Member
 
Join Date: October 15, 2002
Posts: 29
My midway - frankford arsenal, is about a year old. Has survived countless 12 hour overnight and all day at work tumbling sessions without a hitch so far.
Krautguns is offline  
Old October 15, 2002, 05:10 PM   #9
Sisco
Senior Member
 
Join Date: March 25, 1999
Location: KS
Posts: 1,558
Been using a Midway about four years now with no problems.
__________________
"I don't mind it when stupid people say stupid things. Stupid people should be encouraged to say stupid things, that way we always know who the stupid people are." ~ Ted Nugent
http://www.awbansunset.com/awcountdown_sm.gif
Sisco is offline  
Old October 15, 2002, 05:48 PM   #10
kdubya
Member
 
Join Date: September 24, 2002
Location: Mesa, Arizona
Posts: 62
I've got the Lyman Turbo 1200 - had it for years. Nary a problem, and it has a rocker switch unit midway on the power cord.
__________________
Keep off the Ridgeline
kdubya is offline  
Old October 15, 2002, 06:40 PM   #11
leftover
Senior Member
 
Join Date: May 27, 2002
Location: IN
Posts: 172
Thanks for the input fellas, sounds like Lyman is the way to go
leftover is offline  
Old October 15, 2002, 07:18 PM   #12
Jack O'Neal
Junior Member
 
Join Date: March 3, 2002
Posts: 10
I have a Lyman that Quit working after about 6 mo. Replaced it with one from Midway. Being an electrican I can say that all the tumblers I've looked at use the same motor so there isn't a lot of difference between an of them except price.
Jack O'Neal is offline  
Old October 15, 2002, 08:55 PM   #13
leftover
Senior Member
 
Join Date: May 27, 2002
Location: IN
Posts: 172
Thanks Jack, I may just shop by price
leftover is offline  
Old October 15, 2002, 10:03 PM   #14
Skullboy
Senior Member
 
Join Date: September 25, 2002
Location: Haney, B.C. Canada
Posts: 104
I use a RCBS case tumbler.I've been using it now for 10 years with no problems.I leave it going overnight with up to 200 .308 cases.Also have a Midway tumbler I got with their moly coat kit.It doesn't seem as heavy duty as the RCBS.HTH. Skullboy
__________________
DAMAGE INC. CUSTOM CAMO.

If They Call It Tourist Season, Why Can't We Shoot Them?
Skullboy is offline  
Old October 16, 2002, 12:58 AM   #15
leftover
Senior Member
 
Join Date: May 27, 2002
Location: IN
Posts: 172
Well, I ordered a Lyman Turbo 1200 for $44 - seemed like a reasonable deal
leftover is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09330 seconds with 9 queries