The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old May 17, 2000, 05:17 PM   #1
chris k
Junior Member
 
Join Date: February 8, 2000
Posts: 9
i am looking for a remington 870 that has been nicely worked over, ie. synthetic forearm and stock,extended magazine tube,ghost ring sites,sling,side saddle,ect... i have looked at the scattergun tech guns and they look great but is it worth 800 dollars for a worked over 350 dollar shotgun? this gun will be used for patrol duties as well as home defense. thanks for the help
chris k is offline  
Old May 17, 2000, 06:45 PM   #2
Mike Baugh
Senior Member
 
Join Date: October 28, 1998
Location: Indiana
Posts: 405
Chris , see if your LEO supplier can get you the Remington Police model 870 with Ghost rings and an extended tube , it should be a stock Remington item with wood or synthetic , then add your own side saddle and sling . Good luck , Mike...
Mike Baugh is offline  
Old May 17, 2000, 06:59 PM   #3
JNewell
Senior Member
 
Join Date: March 12, 2000
Posts: 1,092
Weeeelll, if the $ are burning a hole in your pocket, Hans Vang will sell you a completely tricked-out 870 or 870 PM. It lacks (maybe?) only a light. Check out http://www.vangcomp.com for details. There are arguments (Dave, this is your opening <g> ) for spending less on hardware and more on ammo and training, but if you want to spend money on hardware, Hans is YTM.

JNewell is offline  
Old May 17, 2000, 07:06 PM   #4
pete80
Senior Member
 
Join Date: July 4, 1999
Posts: 454
I'd go with Mike's option. Find a Remington LE dealer and purchase a gun with an extended mag. tube and ghostring sites. Some of these guns come with polymer stocks as well!

Don't let the LE dealer part scare you away from this gun. They are perfectly legal to own. The fact is, Remington will only sell to LE dealers. If you find one, jump on it!
pete80 is offline  
Old May 17, 2000, 09:19 PM   #5
JNewell
Senior Member
 
Join Date: March 12, 2000
Posts: 1,092
OK, let's try again with less $.

The econo-solution might be: buy an Express, drill or Dremel (a verb? <g> ) out the dimples, install an extended tube (or not, as you wish), install a sidesaddle (if you wish), install a big-head safety, and buy or saw off an 18"-20" barrel. Dave McC has a barrel that's no-choked courtesy of his hacksaw. It works. There's a $100 difference between the PM and the Express that's accounted for as follows:

1. walnut vs. hardwood
2. no dimples
3. phosphate vs. whatever the Express finish is (someone said last week it was bead-blasted then blued...?)
4. IC vs. (I think) cylinder choke
5. metal vs. plastic triggerguard assy

Worth the money? Your call! Still goes BANG with authority...
JNewell is offline  
Old May 18, 2000, 05:29 AM   #6
Dave McC
Staff In Memoriam
 
Join Date: October 13, 1999
Location: Columbia, Md, USA
Posts: 8,812
REMINGTON makes the best tactical 870, folks. But you knew I'd say that(G)...

Any 870 makes one fine HD/Tactical tool, and few mods are mandatory. A decent trigger, sights that work for you and the mission, and maybe taking out those $%^&*( dimples you keep talking about. The bells,whistles, fender skirts and fuzzy dice are nice, but not essential.

On a patrol piece, given unlimited funds and enough time, I'd add a peep and protected front sights, mag extension,sling swivels and sling,and some sort of light.Extra cash would go for ammo and maybe some training past departmental stuff, like Suarez or Awerback.

Also, if your dept will OK it, add a SideSaddle. Extra ammo is nice, and the weight turns that mule into a pony kick wise.
I'd skip the slings with bandolier loops, all that weight swinging will throw the weapon off in a crisis.

As for Vang, Wilson, etc, they have fine products, but all that isn't necessary. Even a stock, out of the box 870 Express is one fine weapon.

J,that bbl was cut by a smith who crowned it,and mounted the ramp and protected post front sight,then did the forcing cone. Good work all the way.
Dave McC is offline  
Old May 18, 2000, 09:09 AM   #7
JNewell
Senior Member
 
Join Date: March 12, 2000
Posts: 1,092
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR> J,that bbl was cut by a smith who crowned it,and mounted the ramp and protected post front sight, then did the forcing cone. [/quote]

Ahhh, shoulda known you'd do it right, including the forcing cone! &lt;g&gt;

JNewell is offline  
Old May 18, 2000, 10:16 AM   #8
Dave McC
Staff In Memoriam
 
Join Date: October 13, 1999
Location: Columbia, Md, USA
Posts: 8,812
J, he talked me into the forcing cone job. First I'd heard of it,and now I preach it to the multitudes(G).

Right now, 3 870s here all have the cone done, and I might get both bbls on the 20 ga done also. It's not a HD tool, just a trainer for the kids.
Dave McC is offline  
Old May 18, 2000, 08:05 PM   #9
gunmart
Senior Member
 
Join Date: March 2, 2000
Posts: 551
try the scattergun tech border patroll model its just $690.it a great way to start.
gunmart is offline  
Old May 20, 2000, 01:31 AM   #10
Bennett Richards
Senior Member
 
Join Date: November 14, 1998
Location: Carlsbad, CA USA
Posts: 343
Scattergun stuff is great... but if you want the best go VANG, VANG, VANG....

Ask any owner you happen to see....

Ben
Bennett Richards is offline  
Old May 20, 2000, 06:16 PM   #11
Jeff Thomas
Senior Member
 
Join Date: December 9, 1998
Location: Texas
Posts: 4,753
If you decide the spend the money, Hans Vang does excellent work, and he is one heck of a nice guy. Never met the man, but when I dealt with him, he treated me like a brother.

Hope he sets up shop in AZ someday.

Regards from AZ
Jeff Thomas is offline  
Old May 22, 2000, 11:17 AM   #12
monoboy
Member
 
Join Date: February 18, 2000
Posts: 21

Hans Vang. Period.

The guy treated me like a brother. I went in to get "the treatment" on my barrel, and walked away with a free lunch for me and my girl. My GF also walked away with a shotgun that actually *fit* her. The smile she had on her face will be remembered for some time.

His customer service is second to none. Many can learn from this gentleman...

My $.02.
monoboy is offline  
Old May 24, 2000, 03:33 PM   #13
SEAN WILLIAMS
Member
 
Join Date: October 5, 1999
Posts: 59
Hey Dave McC: What type of protected front sight does your 870 sport...
SEAN WILLIAMS is offline  
Old May 25, 2000, 05:33 AM   #14
Dave McC
Staff In Memoriam
 
Join Date: October 13, 1999
Location: Columbia, Md, USA
Posts: 8,812
It's a Lyman ramp,post and bead with a metal cover,popular on sporting arms since the 20s. The cover is removable by simply sliding it forward.

When I did the bbl,there was little aftermarket stuff for the 870. Time may have dimmed the memories, but I believe I had all this done before the 81 riot at the Md House of Correction.Working there gave a certain urgency to making a HD plan and getting the tools. I had the 870, courtesy of my Dad,and had the mods done.

One thing about the protected sight, with the aperture out of the Lyman peep, the cover is quite visible in very low light, making it an excellent tool in those scenarios. The post has a touch of white Testor's enamel to speed up acquistion also.

BTW, during my career with the Dept, the most common damage to dept 870s was the loss of the bead sight. It takes little mishandling to knock it off, the ramp and beads being SLIGHTLY better at this than the plain bead. That was one reason I wanted the protection...
Dave McC is offline  
Old May 27, 2000, 09:18 AM   #15
tuc22
Senior Member
 
Join Date: July 6, 1999
Posts: 367
Hans Vang.
tuc22 is offline  
Old May 27, 2000, 10:50 AM   #16
scottMO
Member
 
Join Date: October 25, 1999
Location: Lees Summit MO
Posts: 41
I bought my Rem 870 express for 210.00.
speedfeed stock and forearm- 80.00
extended tube- 20.00
4RD side saddle- 22.00.

total is abt 330.00 for one hell of a tactical shotgun.

scottMO
scottMO is offline  
Old May 28, 2000, 09:05 AM   #17
old hawk
Senior Member
 
Join Date: May 27, 2000
Location: somewhere,maine.
Posts: 175
what im looking for is a trigger group kit to make my express in black matte like an ithaca 37 with a marching trigger. i know timney has trap/disconnector kits but wondering who else has them or if a stock unit can be had from a m+p site? also i got mine new @ 244$ but what i didnt like was the rough feel to it , i cleaned up the flash on the inner rails for the slide on them and inner reciever, also buffed the area the bolt slides on , i wish they coouldve taped up the inner reciever during the matte process as well as cleaned the stuff out of the barrel as well(matte finish yutz leftovers in the bore)the nylon stocks is what i really like but i have to cut the butt end down about an inch or so to get that feel i like more comfortable.i think the finish is a parkerized phosphate myself but aint sure on that one.......
old hawk is offline  
Old May 28, 2000, 02:39 PM   #18
Monkeyleg
Senior Member
 
Join Date: January 25, 2000
Posts: 4,625
Some weeks ago I bought a Benelli M1, and have put just 25 shells through it. I paid $815 for it, but I'm sure I could get $900 at a gun show.

You guys have me second-guessing the 870 vs.
Benelli, so I have some questions to ask. I see that Scott put $330 into his and has a great gun. I like the ghost ring sights, though. Does anyone make them for the 870 at a reasonable price? I was also thinking of a flashlight foregrip, but $200+ seems like a lot of cash. Any other sources for that?

Just mulling this over in my muddled mind.

Thanks,

Dick
Monkeyleg is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:55 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09601 seconds with 9 queries