The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old May 22, 2000, 11:08 AM   #1
monoboy
Member
 
Join Date: February 18, 2000
Posts: 21
I have a M590A1, with the synthetic stock on it. I want to shorten the length of pull by about 1". I've removed the buttpad to test this, and I think it'll work fine.

Anyway, does anyone have any ideas other than a Speedfeed stock? I really don't have the $85 for a new stock. Also, don't really need to hold extra rounds, as I have a sidesaddle.

Thanks for any thoughts.
monoboy is offline  
Old May 22, 2000, 11:39 AM   #2
Jeff, CA
Guest
 
Posts: n/a
Use Mossberg's bantam buttstock. With a 1" recoil pad, LOP is right at 13". The only concern is that it's wood (painted black), rather than synthetic.

I've said this before. If I sound like a broken record, it's because LOP is always an issue with me, and I'm pleased with the way mine turned out.
 
Old May 22, 2000, 12:05 PM   #3
monoboy
Member
 
Join Date: February 18, 2000
Posts: 21

My GF just picked a 590 up this weekend with a Bantam on it. Ideally, I'd need something inbetween in length. Maybe I could just stick a thicker buttpad on the bantam.

Thanks for the tip. I'll check Brownells.
monoboy is offline  
Old May 22, 2000, 03:42 PM   #4
monoboy
Member
 
Join Date: February 18, 2000
Posts: 21

Well, checked Brownell's, and the Bantam was 70 something. To get a buttpad like a pacmyer was another $30. That's more than the speedfeed. So back to the drawing board.

Anyone else have any thoughts.

I wish I could just cut my synthetic down, but there would be no way to mount the butt pad.
monoboy is offline  
Old May 22, 2000, 04:27 PM   #5
jthuang
Senior Member
 
Join Date: January 21, 2000
Posts: 823
If you have the facilities, you could do what the Gunsite Pro Shop does when they want to cut down polymer stocks (notably on the M1S90). The Benelli stock is hollow so they use the following procedure:

1. Remove recoil pad.

2. Cut stock to size.

3. Insert and glue synthetic block inside hollow stock.

4. Drill holes in block.

5. Reattach recoil pad.

They charge over $100 for this service.

Justin

------------------
Justin T. Huang, Esq.
late of Kennett Square, Pennsylvania
jthuang is offline  
Old May 22, 2000, 04:34 PM   #6
LarryLove
Member
 
Join Date: November 7, 1999
Posts: 26
I just ordered a Choate Mark 5 pistol grip/full stock from Bushmaster for my Moss500. You can add spacers to suit you, and the shortest length you can go with is 13", the same as an AR. For me, I think that'd be perfect, it's about 1 inch less. The factory length was just a bit too long for me to use the weapon comfortably.

Oh yeah, Choate makes the same thing without the pistol grip, if that's what you prefer.

[This message has been edited by LarryLove (edited May 22, 2000).]
LarryLove is offline  
Old May 23, 2000, 05:37 AM   #7
Dave McC
Staff In Memoriam
 
Join Date: October 13, 1999
Location: Columbia, Md, USA
Posts: 8,812
I've never been all that enthused about synthetic stocks except for on accurate rifles,and this thread reminds me why. Even a tool challenged type like me can and do change stock length and other dimensions w/o all this trouble with wood.

One thing, outside of bad form, more poor shooting can be blamed on bad stock fit than any other cause.And, while it's just a theory, I opine that HD and slugshooter shotguns will benefit from being stocked like rifles rather than for winged prey.
Dave McC is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06318 seconds with 9 queries