|March 16, 2000, 05:25 PM||#1|
Join Date: October 4, 1999
I purchased a Remington brand synthetic
stock for my Wingmaster 870. No bolt or
other hardware came with it.
First thing I noticed was the inside
hole is significantly different than
that on the wooden stock. It's more
The problem is, the regular bolt was
clearly not designed for the synthetic
I "rigged" it to work by using washers
to "fill the funnel", but it's a
temporary solution at best.
Have you had a similar problem?
How did you solve it?
|March 16, 2000, 08:44 PM||#2|
Join Date: October 29, 1998
Location: mid-coast Maine
You need the bolt made for synthetic stocks. Remington part #97022, you can get it from Brownells, their part #767-970-220. $4.20.