Mossberg 590 action job

JohnG · June 7, 1999, 07:02 PM

I have a Mossberg 590 shotgun with the extended 7 round magazine. Other than it needing a good cleaning, I was wondering if any of the action parts should be polished or de-burred to enhance the functionality of the firearm. Perhaps using 600 grit wet-dry paper on the bolt carrier sides or the action arms?

I can't think of an article or newsthread that discussed doing such a thing. Is it a dumb idea or just not normally done? Should I just keep it clean and leave it at that?

Thanks.

Ewok · June 7, 1999, 08:05 PM

I asked the folks at Vang Comp if they do a "tactical package" which includes "Polish, smooth and hone internal parts" for the 590A1. They said that it didn't need it. I don't know if that's also true of the 590.

Coinneach · June 8, 1999, 10:56 AM

The action on my 500A was silky-smooth right out of the box. I could see getting an action job on a 9200 (auto), but on a pump?

------------------
"America is at that awkward stage.
It's too late to work within the system,
but too early to start shooting the bastards."
--Claire Wolfe

JohnG · June 8, 1999, 11:33 AM

AGI's videotape sure didn't mention doing anything with the pump action - just clean it and lube it.

Guess I just wanted another excuse to take it apart...

Diverdown · June 11, 1999, 05:58 PM

Clean and lube that's all that it needs!

Michael K - NRA, MCRGO

June 7, 1999, 07:02 PM	#1
JohnG Junior Member Join Date: June 2, 1999 Posts: 3	I have a Mossberg 590 shotgun with the extended 7 round magazine. Other than it needing a good cleaning, I was wondering if any of the action parts should be polished or de-burred to enhance the functionality of the firearm. Perhaps using 600 grit wet-dry paper on the bolt carrier sides or the action arms? I can't think of an article or newsthread that discussed doing such a thing. Is it a dumb idea or just not normally done? Should I just keep it clean and leave it at that? Thanks.

June 7, 1999, 08:05 PM	#2
Ewok Junior member Join Date: May 27, 1999 Posts: 380	I asked the folks at Vang Comp if they do a "tactical package" which includes "Polish, smooth and hone internal parts" for the 590A1. They said that it didn't need it. I don't know if that's also true of the 590.

June 8, 1999, 10:56 AM	#3
Coinneach Staff Alumnus Join Date: February 23, 1999 Location: Denver, CO Posts: 4,273	The action on my 500A was silky-smooth right out of the box. I could see getting an action job on a 9200 (auto), but on a pump? ------------------ "America is at that awkward stage. It's too late to work within the system, but too early to start shooting the bastards." --Claire Wolfe

June 8, 1999, 11:33 AM	#4
JohnG Junior Member Join Date: June 2, 1999 Posts: 3	AGI's videotape sure didn't mention doing anything with the pump action - just clean it and lube it. Guess I just wanted another excuse to take it apart...

June 11, 1999, 05:58 PM	#5
Diverdown Member Join Date: May 25, 1999 Posts: 21	Clean and lube that's all that it needs! Michael K - NRA, MCRGO