The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old April 13, 1999, 09:08 AM   #1
Jeff Thomas
Senior Member
 
Join Date: December 9, 1998
Location: Texas
Posts: 4,753
As I understand it, patterning a shotgun is simply experimenting with different loads at different distances so you can determine the specific characteristics of your shotgun.

I'm very much looking forward to taking my 870 to the range this weekend - just got it back from Hans Vang (18" ported barrel, MMC ghostrings, etc.). I plan to try a couple versions of Federal #1 buck, #00 buck, and some game loads. But, here are my questions:

1. What distances should I use? I'm assuming 10, 25 and 50 yards.
2. I've sighted in a rifle, but what is the proper procedure to sight in a shotgun? Right now I figure I'll adjust for 25 yards and see how the 10 yard performance varies - I would assume not too much.

Any other considerations? Does a shotgun barrel need any type break-in procedure?

Main use of this gun is self defense, although I'm sure I'll take it hunting this year as well.

Thanks for your help.

ps - BTW, Hans is a great guy to deal with.
Jeff Thomas is offline  
Old April 13, 1999, 11:13 AM   #2
Harley Nolden
Staff In Memoriam
 
Join Date: January 8, 1999
Location: Brunswick,GA USA
Posts: 1,884
Jeff:
Sighting in a shotgun:

What you are presenting is basically true. Deciding the manner in which the shot, or slug presents itself on the target. NOW What type of target.

With slugs I present it as zeroing a rifle. With shot it is a different matter.

In my opinion:
FOR BIRDS:
The entire shot pattern should be addressed. A target should be large enough that the whole pattern can be viewed.

FOR POLICE WORK:
A target size of an average man is a good size. using different shot, (00 buck, #4's etc) at different distances will tell you what percent of shot will be on the Stop Zone.

There is a test that I use that will give you a good example of the spread by useing several backings in line at different distances. 3yd, 7yd, 15yd, 25yd, 40yd, and 50yd. I used a sandbag rest and as the shot went through each backing I was able to determine the spread.

worked for me

HJN
The entire shot
Harley Nolden is offline  
Old April 16, 1999, 10:04 PM   #3
EricO
Senior Member
 
Join Date: November 14, 1998
Posts: 124
EricK: I guess I'm a little confused also about this. While I was sighting in my Sage sighted ghoshtrings at the 50yd line in preparation for a 3-gun match, I wondered this - This will sight the shotgun in for slugs (that particular load/brand) at that range, but will buckshot at an entirely closer range, say 10-15 yds, pattern satisfactorily at that sight setting? I would assume you would have to check your buckshot load, at that range, with that sight setting, and see firsthand, but what if it isn't satisfactory? Do you check with diff. loads until something is compatible, or use a compromise sight setting? Help me out here Erick. I'm hoping this is a silly question and the answer is that the buckshot should pattern well with a 50yd slug sight setting. EricO
EricO is offline  
Old April 17, 1999, 04:32 PM   #4
EricO
Senior Member
 
Join Date: November 14, 1998
Posts: 124
Gotcha Erick. Thanks for the info. I sometimes make things that aren't problems into problems. In my head that is! :-) My wife calls me anal retentive at times, and I'm inclined to believe her!
EricO is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:27 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05892 seconds with 9 queries