The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old April 4, 1999, 11:45 AM   #1
RickG30
Member
 
Join Date: April 4, 1999
Location: Orlando,Fl USA
Posts: 26
Hello, what is the difference between the 500 and the 590 besides the barrels and mag tubes? The 590 passed the mil-spec test. Did the 500 or was it even tested? What is the difference between the 500USA and the 6-shot 590A1? Do the Mariner's have stainless steel internals? Do the other models have stainless steel internals? Are their any other differences to talk about?
RickG30 is offline  
Old April 4, 1999, 01:05 PM   #2
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,450
As far as I know, you are correct on the differences between the 500 and 590. I suspect the 500 didn't pass evaluation because it was not submitted, not being what was specified. There may be something new (there always is) but, again as far as I know, no Mossberg has stainless steel parts. The Marine model has a pretty tough finish Mossberg calls Marinekote, but the guns are not stainless.
James K is offline  
Old April 4, 1999, 04:34 PM   #3
RickG30
Member
 
Join Date: April 4, 1999
Location: Orlando,Fl USA
Posts: 26
Thanks, Jim. The internals in my Mariner are shiney unlike the marinecote but I guess that they are nickel plated too. My 590internals are black.
Any idea how the 500USA and the new 590A1 6-shot compare? Also is the USA reciever drilled for ghost ring sights?

[This message has been edited by RickG30 (edited April 05, 1999).]
RickG30 is offline  
Old April 5, 1999, 08:38 AM   #4
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,450
I don't think I have seen a USA so don't know if it is drilled or not. As for differences, these are all basically the same gun. You don't indicate what you want the gun for. If on a boat or for a beach house, you would want something resistant to corrosion (Mariner type), but then forget anything else. If you are not around salt water, you can get by fine with any model that otherwise suits your needs.

You seem to be looking for a defense gun, so a short barrel and extended mag are good ideas. If you already have a good hunting shotgun with a 5 round capacity, I would look to just getting a short barrel for it rather than buying a new gun. Your choice.

Any suitable shotgun can be drilled for ghost ring sights, which sound more impressive than they are anyway.
James K is offline  
Old April 10, 1999, 02:08 PM   #5
Kodiac
Senior Member
 
Join Date: August 16, 1999
Posts: 1,173
I really miss my 590...
I had a Butler Creek folding stock on it and it made a great patrol gun... a sling and a wee little minimag light with a presser switch tail cap made it just the thing for building searches.

Thing was as heavy as an steele EYE-BEAM!

------------------
"There is no Spoon"
Kodiac is offline  
Old April 10, 1999, 08:35 PM   #6
RickG30
Member
 
Join Date: April 4, 1999
Location: Orlando,Fl USA
Posts: 26
Kodiac, glad you mentioned heavy. I took a 3-day Randy Cain shotgun course and my 590 felt like it weighed a ton on the last day.
By the way the consensus was that the Mossbergs in the class wouldn't make it thur the whole 3 days. It turned out that they were the only ones that had no problems! I use my Mariner on the boat and have a 500 in cabin.
I'm trying to standardize the sights and accessories with my 590 and 500 house guns.
Rick
RickG30 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07605 seconds with 9 queries