The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old December 19, 2000, 04:32 PM   #1
Hook_N_Bullet
Senior Member
 
Join Date: November 17, 2000
Location: Pittsburgh
Posts: 127
I mistakenly bought Black Powder ammo for CAS (and I bought a heck of a lot!) But now that I've shot it, I think it's kinda neat.

My question is, should I vary the way I clean my guns (Marlin 1894 CB II, and Ruger Vis-Baq's). I cleaned them with CLP, Powder-Blast, then Rem-Oil; this is my usual method. But someone told me (this scares me) that soapy warm water works great on black powder. I really hesitate to try this. Especially since my Rugers are finished with the Case-Hardened look.

Thanks in advance,

Dave
Hook_N_Bullet is offline  
Old December 19, 2000, 07:31 PM   #2
Bill Mitchell
Staff Alumnus
 
Join Date: October 15, 1998
Location: Roswell,GA
Posts: 433
Howdy,

Warm soapy water is a good way to clean up BP fouling. Also, some folks use vinegar (NOT ammonia) based Windex. Around here, Ballistol is quite popular for cleaning guns, and it does a number on BP fouling. Whatever you choose, don't let your guns sit after shooting BP-clean them as soon as possible after shooting them.

None of the above will harm the finish on your guns.

Bellicose Bill
Bill Mitchell is offline  
Old December 21, 2000, 08:24 AM   #3
dreadnaught
Member
 
Join Date: November 7, 2000
Posts: 89
Liten to Bill. He knows of what he speaks.
dreadnaught is offline  
Old April 14, 2002, 10:32 PM   #4
Sixgun_Symphony
Junior member
 
Join Date: April 13, 2002
Location: Seattle
Posts: 92
I recommend that you disassmemble the guns and use hot soapy water for cleaning. Then use a natural lubricant like TC's Borebutter(TM) to season the shooting irons.

You do not want to use any petroleum based oils as they will cause excessive fouling. Use the Borebutter or go with Ballistol for BP guns.
Sixgun_Symphony is offline  
Old April 15, 2002, 07:40 AM   #5
tonyz
Senior Member
 
Join Date: January 29, 2000
Location: Wa
Posts: 922
When I get back from the range, I dissasemble my revolvers and then head to the sink, were I proceed to scrub the parts clean. After that I blow off any excess water with my air hose.
Then back to the bench to clean the bore and lube um.


Tony
__________________
Nothing Ventured Nothing Gained
tonyz is offline  
Old April 15, 2002, 10:55 AM   #6
Malpaso
Senior Member
 
Join Date: March 8, 2000
Location: MA
Posts: 177
Hot soapy water, the hotter the better. If you get the metal hot enough, it will actually cause excess water to evaporate. Some cap n ball shooters actually clean their guns, without grips, in the dishwasher. Those would be the shooters with very understanding wives . My dishwasher doesn't get hot enough in the drying cycle to work. I use Windex at the range, and the hot water method at home. This is only with cap n ball, however. For the limited BP cartridge I have shot, I used a mixture of 1/3 Murphys, 1/3 Hydrogen Peroxide and 1/3 water.
Malpaso is offline  
Old April 16, 2002, 10:27 PM   #7
Salt
Junior member
 
Join Date: December 26, 2001
Posts: 673
Ballistol


>
>
BALLISTOL dissolves traces of lead, copper, zinc, brass and tombac, which are used to make projectiles and jackets for them. Residues of these metals will remain in the bore of any firearms as a result of shooting jacketed or unjacketed lead projectiles. The use of BALLISTOL makes scraping or brushing the bore unnecessary. Just pour or spray enough into the barrel and chamber, turn the firearm around several times to allow the liquid to reach all parts and let it "go to work". Later, the residues will then completely be cleaned out.

Due to its alkaline character BALLISTOL is ideal for cleaning and maintaining black powder firearms. BALLISTOL eliminates the need for brutal mechanical scrubbing and aggressive solvents.

Of course, you should also use BALLISTOL to treat your holsters, belts and carrying slings.
>
>
Salt is offline  
Old June 20, 2002, 12:16 PM   #8
Steyr
Member
 
Join Date: July 10, 2001
Location: Oxford Mills,Ontario
Posts: 23
I use Windex w. vinegar,followed by Ed's Red.
Steyr is offline  
Old June 20, 2002, 02:10 PM   #9
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 36,074
No matter what you do, you HAVE to use some sort of solvent that contains a good deal of water -- hot soapy water, Simple Green, Windex, etc.

It's the water component that dissolves the corrosive elements in the fouling. Oil does not touch this stuff (it's very similar chemically to table salt), only water.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old June 24, 2002, 12:43 PM   #10
scotjute
Senior Member
 
Join Date: December 6, 2001
Location: texas
Posts: 259
I use warm-to-hot slightly soapy water. Follow with a rinse of boiling water. (be careful) Hand dry gun and then place in an oven that was heated to 150 F and then turned off for about 15 minutes or so.
Note I do not leave oven on at 150 F when gun is in there, just heat it up to 150 and turn off. Just opening it to place gun in probably drops temp. in there by 5-10 F.
scotjute is offline  
Old June 26, 2002, 08:48 AM   #11
dfm
Member
 
Join Date: May 19, 2002
Posts: 99
I haven't used water/water-based cleaners in my BP guns since Shooters Choice introduced their BP Gel. A petroleum-based cleaner it sticks to a cleaning patch and doesn't make a mess of things. I have an aversion to putting water to gun metal unless absolutely necessary. The BP Gel works wonders and cuts through fouling like nobody's business. Give it a try. You'll fall in love with it. Definitely worth the asking price, which by the way, is quite reasonable.

dfm
dfm is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07342 seconds with 9 queries