The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old May 24, 2002, 08:04 PM   #1
jjmorgan64
Senior Member
 
Join Date: August 8, 2001
Posts: 519
Win 94 hot loads

How hot of loads will a Win 94 in 45 Colt, I don't say long but that would make an excelent thread, take?

Will they take the Ruger only loads with no problem?

I assume they will but wanted to ask, the whole better safe than exploded thing you know.
__________________
The Forty-Four spoke and it sent lead and smoke
And seventeen inches of flame. -Marty Robbins

JM
jjmorgan64 is offline  
Old May 24, 2002, 10:11 PM   #2
Byron Adams
Senior Member
 
Join Date: February 25, 2001
Location: Ellijay, GA
Posts: 176
I loaded mine using Ruger loads and was pleased with it. the Hornady manual 4th Edition gave good data with the 250 grain XTP.
Byron Adams is offline  
Old May 25, 2002, 09:07 AM   #3
Johnny Guest
Moderator Emeritus
 
Join Date: August 28, 1999
Location: North Texas
Posts: 4,116
I feel you'd be okay, all other factors being equal - - -

Please note: This is a single source only. I trust the information below.

Speer Reloading Manual Number 12 shows---
SAAMI standard maximum loads for .45 Colt at 14,000 copper units of pressure (cup.)
Their "Ruger and Contender ONLY" .45 Colt loads run up to 25,000 cup.

Same source, .44 Mag loads, max allowable pressure 36,000 pounds per square inch (psi), NOT cup. Sorry, I don't have the psi/cup conversion at hand.

And, their load data for .30-30 Winchester do not exceed 38,000 cup, tested in a Winchester Model 94.

All the .45 Colt cal. Win 94s are of recent production, so you're not dealing with old fashioned metallurgy. I can't picture USRA/Winchester producing a WEAKER action for .45 Colt than for their .44 Mag and .30-30 arms. Knowing the above, I would feel comfortable using any load I'd shoot in a Ruger Blackhawk or Vaquero in a factory chambered Win 94.

You're right, jj- - - It only costs a little time to ask--Better safe than sorry.

Hope this helps your peace of mind.

Best,
Johnny Guest
__________________
MOLON LABE!
Amendment II ensures the rest of the Bill of Rights.

Blog: Expert Witness
Johnny Guest is offline  
Old May 25, 2002, 09:36 AM   #4
Rick R
Senior Member
 
Join Date: April 1, 2002
Location: On top of a mountain in WV
Posts: 102
I have a Winchester 94 and a Ruger Vaquero in .45. The Ruger loads bulged in the web area when fired through the Winchester. Apparently the Winchesters have a reputation for oversized chambers. I didn't have any problems with merely warm Colt loads, it was the 300gr JSP at 1200 fps that were iffy.

My buddies Rossi Puma m-92 clone does much better and is a bit more classy to boot.

YMMV

Rick
Rick R is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:08 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05889 seconds with 9 queries