The Firing Line Forums - View Single Post - M1a problems

Ivan · April 3, 2011, 10:58 PM

Buy a new bolt and confirm that the headspace is unchanged. If the roller comes off the bolt, you can't really re-install it and expect it to stay unless you replace the lock ring which is inside the roller.

- Ivan.

April 3, 2011, 10:58 PM	#4
Ivan Senior Member Join Date: October 14, 2009 Posts: 141	Buy a new bolt and confirm that the headspace is unchanged. If the roller comes off the bolt, you can't really re-install it and expect it to stay unless you replace the lock ring which is inside the roller. - Ivan.