|
It's not too hard to replicate. It is a polyurethane finish. I refinished one years ago: stripped it with Jasco, sanded to 600 grit (taped off the checkering), sprayed it with Varathane, cured it at about 100 degrees for a month, then lightly sanded with 600 grit and buffed it to a high gloss. The owner was ecstatic.
If I were to do the same job today, I would use Brownells' Acra Seal Wood, a spray epoxy finish, available in either gloss or matte. It is much harder than polyurethane, but not quite as clear. 3-5 coats would give the depth of finish.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
|