The Firing Line Forums - View Single Post

flatlander · July 8, 1999, 12:09 AM

PaulB. Thanks for the replies. The little bit of work I've done on this was with bullets cast of WW+2% tin. Used LBT lube. Loads were in the 1750fps range, if memory serves. I had all my load data on my old computer, and haven't transfered it at this point. I need to work with some other powders, but all my time has been dedicated to loading and practicing with my AR for across the course High Power matches. Maybe later this fall, when the last match is done, I can find the time to play with this rifle. I really wanted to find a good M94 carbine to work with, but when this Centennial came along, I thought maybe a Badger Barrel would be a natural for cast bullets - several of my friends shoot BPCRS and use Badger barrels - they shoot real well.

July 8, 1999, 12:09 AM	#3
flatlander Senior Member Join Date: June 16, 1999 Posts: 120	PaulB. Thanks for the replies. The little bit of work I've done on this was with bullets cast of WW+2% tin. Used LBT lube. Loads were in the 1750fps range, if memory serves. I had all my load data on my old computer, and haven't transfered it at this point. I need to work with some other powders, but all my time has been dedicated to loading and practicing with my AR for across the course High Power matches. Maybe later this fall, when the last match is done, I can find the time to play with this rifle. I really wanted to find a good M94 carbine to work with, but when this Centennial came along, I thought maybe a Badger Barrel would be a natural for cast bullets - several of my friends shoot BPCRS and use Badger barrels - they shoot real well.