The Firing Line Forums - View Single Post - stripping the stock, but have plastic spacers

UniversalFrost · June 27, 2010, 10:56 AM

the spacers are the only thing plastic, the tip and cap are actually ebony stained wood. I am going down to the auto hobby shop today and see if i can find some stripper that is safe on plasitcs (or hit the auto paint store on monday). if not then oven cleaner is worth trying. if that doesn't work then I will be taping off the plastic spacers really well and just really lightly sand those areas.

thanks for all the help guys.

June 27, 2010, 10:56 AM	#7
UniversalFrost Senior Member Join Date: February 20, 2006 Location: Ohio Posts: 2,300	the spacers are the only thing plastic, the tip and cap are actually ebony stained wood. I am going down to the auto hobby shop today and see if i can find some stripper that is safe on plasitcs (or hit the auto paint store on monday). if not then oven cleaner is worth trying. if that doesn't work then I will be taping off the plastic spacers really well and just really lightly sand those areas. thanks for all the help guys. __________________ Lifetime member VFW and NRA "Quando Omni Flunkus Moritati" (when all else fails play dead) -Red Green