|
I have been using CCI match primers in my hunting loads, they work fine !
depending on your load and temp. you may need to use a magnum primer
ball powders are harder to ignite than stick powders and can cause problems
in cold temp. or less than 80% case fill
( in my hunting loads(308, 3006, 8MM) I use stick powder(4895,Varget, 4064 and have had no problems)
if you are going to use a ball powder in cold temp. work up your load with a magnum primer to avoid any problems
( slow fires, squibs, bullet in the barrel and powder not ignited )
|