The Firing Line Forums - View Single Post

Xaak · January 13, 2013, 12:04 AM

I had an inferior hex (allen key) wrench snap off inside the top bolt on my Browning Buckmark. I have tried to remove it using magnets, tweezers and other items, but it's not coming out. It does have some movement when nudged, so it is not frozen in the bolt. Any suggestions on getting this out without going to the screw removing and getting a new bolt to replace it would be appreciated.

Thanks

January 13, 2013, 12:04 AM	#1
Xaak Member Join Date: January 2, 2013 Location: NYC, L.A. and Va Posts: 62	Broken Hex Wrench I had an inferior hex (allen key) wrench snap off inside the top bolt on my Browning Buckmark. I have tried to remove it using magnets, tweezers and other items, but it's not coming out. It does have some movement when nudged, so it is not frozen in the bolt. Any suggestions on getting this out without going to the screw removing and getting a new bolt to replace it would be appreciated. Thanks __________________ The liberties of our country, the freedoms of our civil Constitution are worth defending at all hazards; it is our duty to defend them against all attacks. ~ Samuel Adams ~