The Firing Line Forums - View Single Post

Tom-C · February 12, 2013, 05:55 PM

Hi,

I am trying to identify a tool or something I got when I bought out a gunsmith

The large outer ring in 1 X 1 inch and has tick marks on the right side where it tapers. It is .694 ID and 40 TPI the whole length.

The inner barrel is .7135 OD and again 40 TPI. It is 1.13 long and has a set screw and a locking ring. There are two inner diameters; .437 under where the set screw is and .576 for .540 inches on the other side.

Thanks

February 12, 2013, 05:55 PM	#1
Tom-C Member Join Date: July 25, 2008 Posts: 45	Help identifing item Hi, I am trying to identify a tool or something I got when I bought out a gunsmith The large outer ring in 1 X 1 inch and has tick marks on the right side where it tapers. It is .694 ID and 40 TPI the whole length. The inner barrel is .7135 OD and again 40 TPI. It is 1.13 long and has a set screw and a locking ring. There are two inner diameters; .437 under where the set screw is and .576 for .540 inches on the other side. Thanks Last edited by Tom-C; February 12, 2013 at 07:31 PM.